Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications5. Functional Execution Command Table5.1 Image Command TableExecute commandItemCF_CONT_%1[CR]Set value of ContrastCF_BRIGHT_%1[CR] Set value of BrightnessCF_COLOR_%1[CR] Set value of ColorCF_TINT_%1[CR]Set value of TintCF_COLMNSAV_%1[CR] Set area to store current values of Color ManagementCF_COLMNLD_%1[CR] Set area to load values of Color ManagementCF_APCTRL_%1[CR] Set level of Auto Picture ControlCF_COLTEMP_%1[CR] Set level of Color TemperatureCF_WBAL-R_%1[CR] Set Red value of White BalanceCF_WBAL-G_%1[CR] Set Green value of White BalanceCF_WBAL-B_%1[CR] Set Blue value of White BalanceCF_OFFSET-R_%1 [CR] Set Red value of OffsetCF_OFFSET-G_%1 [CR] Set Green value of OffsetCF_OFFSET-B_%1 [CR] Set Blue value of OffsetCF_SHARP_%1[CR] Set value of SharpnessCF_GAMMA_%1[CR] Set value of GammaCF_NZRED_%1[CR] Set ON/OFF of Noise reductionCF_PROGV_%1[CR] Set mode of Progressive scanCF_BCOLOR_%1[CR] Set ON/OFF of Brilliant ColorCF_IMAGE_%1[CR] Set Image modeCF_IMAGEADJ_%1[CR] Set Store/Reset of values in Image Adjustment5.2 PC Control Command TableExecute commandCF_FSYNC_%1[CR]CF_TDOTS_%1[CR]CF_H-POS_%1[CR]CF_V-POS_%1[CR]CF_CLAMP_%1[CR]CF_DDOTS_%1[CR]CF_DLINE_%1[CR]CF_SETPCADJ_%1[CR]CF_ORGMODE_%1[CR]CF_PCSTORE_%1[CR]CF_PCMODEFREE_%1[CR]Set value of Fine SyncSet value of Total DotsItemSet value of Horizontal PositionSet value of Vertical PositionSet value of ClampSet value of Display DotsSet value of Display LineApply values set in PC Adjust menu to screen imageSpecify the original signal for the selected PC modeStore current setting values in PC Adjust menu toMode %1Delete the values registered in Mode %1 and return it toFree status.DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)13/101