Owner's Manual 2011 CR/WR/XC 125/150 - Husqvarna

HANDLEBAR POSITION AND HEIGHT CHANGEThe handlebar position (a) and height (b) can be changed forbetter suiting Your driving requirements. To effect these operations,remove the upper clamp (1) and the lower one (2), afterremoving the fixing srews (3) and (4).a) Handlebar position changeTurn the lower clamp (2) 180° to move forward or backward(10mm- 0.04in.) the handlebar position with respect to theoriginal setup.b) Handlebar height changeRemove the lower spacer (A) then replace the screw (4) with anew one of L=65 mm (2.56 in.) height.Once these operations are completed, tighten the screws (3) to2,75-3,05 kgm (27-30 Nm; 19.9-22 Lb/fts) and the screws (4)to 2,0-2,2 kgm (19,6-21,6 Nm; 14.5-15.9 Lb/fts4132A1A2330