Owner's Manual 2011 CR/WR/XC 125/150 - Husqvarna

DIGITAL INSTRUMENT, WARNING LIGHTS (WR)- The instrument functions are the following, as shown below.1- SPEED (Km/h or mph) / ODO (figure 1)The motorcycle is equipped with a digital instrument; on theinstrument are located 2 warning lights too: high beam andblinkers.1- BLUE warning light “HIGH BEAM”2- GREEN warning light “BLINKERS”The instrument display illuminates (amber colour) when theengine started.NOTES- Every time the engine starts, for the first 2 seconds, theinstrument shows the version of the checking SW; after thecheck, the instrument shows the last planned function.- When the motorcycle engine is OFF, the instrument doesn’talso show its functions.- To select the instrument functions and to set to zero thefunctions, use the SCROLL knob (A).1- SPEED / ODO (figure 1)2- SPEED / CLOCK (figure 2)3- SPEED / TRIP (figure 3)4- SPEED / CHRONO (figure 4)1- SPEED / ODO (figure 1).................- SPEED: motorcycle speed- maximum value: 299 Km/h or 299mph;- ODO: odometer- maximum value: 99999 km;To replace kilometers with miles or miles with kilometers proceedas follows:1) set to figure 1, stop the engine and push the knob SCROLL(A);2) Start the engine holding pushed the button SCROLL (A) untilthe symbol “Km/h” will be displayed;3) then the symbols “Km/h” and “Mph Miles” will be displayedalternatively. Push again the SCROLL (A) button when theunit you wish to use is displayed.EN11