VEGAPULS WL 61 - 4 ⦠20 mA/HART - two-wire
VEGAPULS WL 61 - 4 ⦠20 mA/HART - two-wire VEGAPULS WL 61 - 4 ⦠20 mA/HART - two-wire
1 About this document1 About this document1.1 FunctionThis operating instructions manual provides all the information youneed for mounting, connection and setup as well as important instructionsfor maintenance and fault rectification. Please read this informationbefore putting the instrument into operation and keep this manualaccessible in the immediate vicinity of the device.1.2 Target groupThis operating instructions manual is directed to trained qualifiedpersonnel. The contents of this manual should be made available tothese personnel and put into practice by them.1.3 Symbolism usedInformation, tip, noteThis symbol indicates helpful additional information.Caution: If this warning is ignored, faults or malfunctions can result.Warning: If this warning is ignored, injury to persons and/or seriousdamage to the instrument can result.Danger: If this warning is ignored, serious injury to persons and/ordestruction of the instrument can result.Ex applicationsThis symbol indicates special instructions for Ex applications.• ListThe dot set in front indicates a list with no implied sequence.→ ActionThis arrow indicates a single action.1 SequenceNumbers set in front indicate successive steps in a procedure.Battery disposalThis symbol indicates special information about the disposal of batteriesand accumulators.6VEGAPULS WL 61 • 4 … 20 mA/HART - two-wire38061-EN-121011
2 For your safety2 For your safety2.1 Authorised personnelAll operations described in this operating instructions manual mustbe carried out only by trained specialist personnel authorised by theplant operator.During work on and with the device the required personal protectiveequipment must always be worn.2.2 Appropriate useVEGAPULS WL 61 is a sensor for continuous level measurement.You can find detailed information on the application range in chapter"Product description".Operational reliability is ensured only if the instrument is properlyused according to the specifications in the operating instructionsmanual as well as possible supplementary instructions.2.3 Warning about incorrect useInappropriate or incorrect use of the instrument can give rise toapplication-specific hazards, e.g. vessel overfill or damage to systemcomponents through incorrect mounting or adjustment.38061-EN-121011VEGAPULS WL 61 • 4 … 20 mA/HART - two-wire2.4 General safety instructionsThis is a state-of-the-art instrument complying with all prevailingregulations and guidelines. The instrument must only be operated in atechnically flawless and reliable condition. The operator is responsiblefor the trouble-free operation of the instrument.During the entire duration of use, the user is obliged to determine thecompliance of the necessary occupational safety measures with thecurrent valid rules and regulations and also take note of new regulations.The safety instructions in this operating instructions manual, the nationalinstallation standards as well as the valid safety regulations andaccident prevention rules must be observed by the user.For safety and warranty reasons, any invasive work on the devicebeyond that described in the operating instructions manual may becarried out only by personnel authorised by the manufacturer. Arbitraryconversions or modifications are explicitly forbidden.The safety approval markings and safety tips on the device must alsobe observed.Depending on the instrument version, the emitting frequencies are inthe C or K band range. The low emitting frequencies are far below theinternationally approved limit values. When used correctly, there is nodanger to health.7
- Page 1 and 2: Operating InstructionsRadar sensor
- Page 3 and 4: Quick start0,5 m(19.68")100%25 m(19
- Page 5: Contents10 Dismounting10.1 Dismount
- Page 9 and 10: 2 For your safetytection. The envir
- Page 11 and 12: 3 Product descriptionScope of deliv
- Page 13 and 14: 4 Mounting4 MountingSuitability for
- Page 15 and 16: 4 Mounting> 200 mm(7.87")Fig. 8: Ve
- Page 17 and 18: 4 MountingFig. 12: Rotation in the
- Page 19 and 20: 4 MountingFig. 16: Mounting of the
- Page 21 and 22: 4 MountingFoam generationFlow measu
- Page 23 and 24: 5 Connecting to power supply5 Conne
- Page 25 and 26: 6 Set up with VEGADIS 626 Set up wi
- Page 27 and 28: 6 Set up with VEGADIS 62Information
- Page 29 and 30: TWISTUSB7 Setup with PACTwareVia in
- Page 31 and 32: 7 Setup with PACTwareIf these value
- Page 33 and 34: 9 Diagnosis, Asset Management and s
- Page 35 and 36: 9 Diagnosis, Asset Management and s
- Page 37 and 38: 9 Diagnosis, Asset Management and s
- Page 39 and 40: 9 Diagnosis, Asset Management and s
- Page 41 and 42: 9 Diagnosis, Asset Management and s
- Page 43 and 44: 10 Dismounting10 Dismounting10.1 Di
- Page 45 and 46: 11 Supplement3142Fig. 44: Data of t
- Page 47 and 48: 11 SupplementTracking speed of the
- Page 49 and 50: 11.2 Radio astronomy stations11 Sup
- Page 51 and 52: 11 SupplementVEGAPULS WL 61, versio
- Page 53 and 54: 11 SupplementVEGAPULS WL 61, versio
- Page 55 and 56: 11 Supplement11.4 Industrial proper
2 For your safety2 For your safety2.1 Authorised personnelAll operations described in this operating instructions manual mustbe carried out only by trained specialist personnel authorised by theplant operator.During work on and with the device the required personal protectiveequipment must always be worn.2.2 Appropriate use<strong>VEGAPULS</strong> <strong>WL</strong> <strong>61</strong> is a sensor for continuous level measurement.You can find detailed information on the application range in chapter"Product description".Operational reliability is ensured only if the instrument is properlyused according to the specifications in the operating instructionsmanual as well as possible supplementary instructions.2.3 Warning about incorrect useInappropriate or incorrect use of the instrument can give rise toapplication-specific hazards, e.g. vessel overfill or damage to systemcomponents through incorrect mounting or adjustment.380<strong>61</strong>-EN-121011<strong>VEGAPULS</strong> <strong>WL</strong> <strong>61</strong> • 4 … <strong>20</strong> <strong>mA</strong>/<strong>HART</strong> - <strong>two</strong>-<strong>wire</strong>2.4 General safety instructionsThis is a state-of-the-art instrument complying with all prevailingregulations and guidelines. The instrument must only be operated in atechnically flawless and reliable condition. The operator is responsiblefor the trouble-free operation of the instrument.During the entire duration of use, the user is obliged to determine thecompliance of the necessary occupational safety measures with thecurrent valid rules and regulations and also take note of new regulations.The safety instructions in this operating instructions manual, the nationalinstallation standards as well as the valid safety regulations andaccident prevention rules must be observed by the user.For safety and warranty reasons, any invasive work on the devicebeyond that described in the operating instructions manual may becarried out only by personnel authorised by the manufacturer. Arbitraryconversions or modifications are explicitly forbidden.The safety approval markings and safety tips on the device must alsobe observed.Depending on the instrument version, the emitting frequencies are inthe C or K band range. The low emitting frequencies are far below theinternationally approved limit values. When used correctly, there is nodanger to health.7