VEGAPULS WL 61 - 4 â¦ 20 mA/HART - two-wire

More documents

Recommendations

Info

4 Mounting1Fig. 10: Horizontal mounting with the optional mounting strap with integratedreflector1 Reference planeInformation:With this combination (by default), the offset is already taken into account.The lower side of the mountng seal is the reference plane.FlangeFor mounting the instrument on a socket or a manhole cover, an unassembledcombination compression flange is optionally available forDN 80 (ASME 3" or JIS 80), also as a retrofitting part. As an alternative,the instrument can be already supplied with a tight, fix-mountedadapter flange from DN 100 (ASME 4" or JIS 100).You can find drawings of these mounting options in chapter "Dimensions".Fig. 11: Mounting by means of an adapter flange, for example, on a manhole lid.164.3 Mounting preparations, mounting strapThe optional mounting strap is supplied unassembled. It must bescrewed to the sensor before setup with the attached screws. Max.torque, see chapter "Technical data". Required tools: Allen wrenchsize 4.There are two different ways of screwing the strap to the sensor.Depending on the selected method, the sensor can be rotated inthe strap infinitely variable through 180° or in three steps 0°, 90° and180°.VEGAPULS WL 61 • 4 … 20 mA/HART - two-wire38061-EN-121011
4 MountingFig. 12: Rotation in the centre with ceiling mountingFig. 13: Adjustment of the angle of inclination in case of wall mountingTight installation of theplastic horn antennaPolarisation plane4.4 Instructions for installationFor tight installation of the version with plastic horn antenna with compressionor adapter flange, the following conditions must be fulfilled:1. Use suitable flat seal, e.g. of EPDM with Shore hardness 25 or 502. Make sure the number of flange screws corresponds to the numberof flange holes3. Tighten all screws with the torque stated in the technical dataThe emitted radar impulses of the radar sensor are electromagneticwaves. The polarisation plane is the direction of the electrical wavecomponent. By turning the instrument in the connection flange ormounting strap, the polarisation can be used to reduce the effects offalse echoes.The position of the polarisation level is marked by marking bars on theinstrument.38061-EN-121011VEGAPULS WL 61 • 4 … 20 mA/HART - two-wire17
Page 1 and 2: Operating InstructionsRadar sensor
Page 3 and 4: Quick start0,5 m(19.68")100%25 m(19
Page 5 and 6: Contents10 Dismounting10.1 Dismount
Page 7 and 8: 2 For your safety2 For your safety2
Page 9 and 10: 2 For your safetytection. The envir
Page 11 and 12: 3 Product descriptionScope of deliv
Page 13 and 14: 4 Mounting4 MountingSuitability for
Page 15: 4 Mounting> 200 mm(7.87")Fig. 8: Ve
Page 19 and 20: 4 MountingFig. 16: Mounting of the
Page 21 and 22: 4 MountingFoam generationFlow measu
Page 23 and 24: 5 Connecting to power supply5 Conne
Page 25 and 26: 6 Set up with VEGADIS 626 Set up wi
Page 27 and 28: 6 Set up with VEGADIS 62Information
Page 29 and 30: TWISTUSB7 Setup with PACTwareVia in
Page 31 and 32: 7 Setup with PACTwareIf these value
Page 33 and 34: 9 Diagnosis, Asset Management and s
Page 43 and 44: 10 Dismounting10 Dismounting10.1 Di
Page 45 and 46: 11 Supplement3142Fig. 44: Data of t
Page 47 and 48: 11 SupplementTracking speed of the
Page 49 and 50: 11.2 Radio astronomy stations11 Sup
Page 51 and 52: 11 SupplementVEGAPULS WL 61, versio
Page 53 and 54: 11 SupplementVEGAPULS WL 61, versio
Page 55 and 56: 11 Supplement11.4 Industrial proper
Page 57 and 58: Notes38061-EN-121011VEGAPULS WL 61
Page 59 and 60: Notes38061-EN-121011VEGAPULS WL 61

VEGAPULS WL 61 - 4 â¦ 20 mA/HART - two-wire

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

VEGAPULS WL 61 - 4 â¦ 20 mA/HART - two-wire