R&S®FT224 VHF/UHF Diplexer - Rohde & Schwarz

Accessories R&S®FT224 VHF/UHF DiplexerR&S®FT224VHF/UHF Diplexer100 MHz to 174 MHz225 MHz to 400 MHzFor connecting a broadband antenna to transceiverswith separate VHF and UHF outputsThe R&S®FT224 VHF/UHF diplexer allows the connectionof a broadband antenna (e.g. the R&S®HK014E VHF/UHFcoaxial dipole) to transceivers with separate VHF and UHFoutputs or to separate VHF and UHF transceivers.The diplexer has a maximum input power of 200 W CWand 800 W PEP. These values (for one channel) also applyfor simultaneous operation of both channels.Key facts❙❙Low passband attenuation❙❙High stopband attenuation❙❙200 W CW/800 W PEP❙❙Compact design❙❙Versatile applicationsRohde & Schwarz HF – VHF/UHF – SHF Antennas | Catalog 2012/2013

Accessories R&S®FT224 VHF/UHF Diplexer10 kHz 1.5 10 100 MHz 1 1.3 GHz 10 18 26.5 4012SpecificationsFrequency range100 MHz to 174 MHz,225 MHz to 400 MHzMax. input power200 W CW, 800 W PEP (per channelwith simultaneous operation)3Input impedance50 ΩConnectors3 × N femaleVSWR≤ 1.5 (with 50 Ω termination)MTBF> 100 000 hInsertion lossIn passbandIn stopband0.5 dB (typ. 0.25 dB)> 30 dB (VHF/UHF)Operating temperature range –20 °C to +55 °CDimensions (W × H × L) approx. 130 mm × 50 mm × 130 mm(5.1 in × 2 in × 5.1 in)4Weightapprox. 0.5 kg (1.1 lb)5Ordering information Type Order No.VHF/UHF Diplexer R&S®FT224 0525.5117.04Recommended extrasCoaxial Dipole R&S®HK014E 4095.5000.02Coaxial Dipole R&S®HK033 4062.8369.02678910Typical filter characteristic0Dimensions in mm and installation bore holes311ø 7.0 (4 ×)Insertion loss in dB–0.5–1–1.5Effectivebandwidth111.76101UHF (225 MHz to 400 MHz)200 W CW (max.)800 W PEP (max.)VHF (100 MHz to 174 MHz)76.2Output127N connectors,female (3 ×)1213–2100 174 200 225300 400Frequency in MHz50127Rohde & Schwarz HF – VHF/UHF – SHF Antennas | Catalog 2012/2013