LAFORGE - Front Hitches - Front PTOs - All tractor brands

FRONT HITCHESFRONT PTOSFOR ALL TRACTORS BRANDSLAFORGE’s quality for all tractorsPHOTO : HDIWITH OPTIONALACCESSORIESwww.laforge.fr

LAFORGE FRONT HITCHESFor transport, most common applicationsand centered load implementsST3 - ST3.8With the ST3 and the ST3.8, LAFORGEoffers simple and economic front hitches,compatible with front loaders*.Ground clearance and manoeuverabilityare fully retained.ST3 on Mc Cormick MC 120Standard Equipment• Folding arms• Cat 3 automatic hooks• Tow hook• Top link with storage positionTechnical Data ST3 ST3.8 ST4 - PR4 ST5 - PR5Category 3N 3N 3N 3NLift capacity 3000 Kg 3800 Kg 4000 Kg 5000 KgLift range 670 mm 760 mm 750 mm 750 mmST4 - ST5With the ST4 and the ST5, LAFORGE offers simplefront hitches with an important lifting capacityGround clearance and manoeuverability are fullyretained.ST4 on Massey Ferguson 6480Standard Equipment• Parallel foldable arms with locked or fl oatingmode• Cat 3 automatic hooks• Tow hook• Top link with storage position• Parallel hydraulic hook up with isolating valve*Dependingon the modelAll our LAFORGE front hitches are fully integrated to the tractThey are compatible with standard or suspended front axle

FRONT HITCHES LAFORGEFor all common applications,even with offset load implementsPR4 - PR5With the PR4 and the PR5, LAFORGE offers simplefront hitches for applications with offset loads.Ground clearance and manoeuverability are fullyretained.PR4 on Claas Arion IT4Standard Equipment• Parallel foldable arms with locked or fl oatingmode• Cat 3 automatic hooks• Tow hook• Top link with storage position• Parallel hydraulic hook up with isolating valveLAFORGE FRONT HITCHFor intensive applicationssuch as sub-soiler or dozer bladeHDIThe lower bracket of the HDI front hitch is reinforced,to withstand pushing loads, generated by implementssuch as rippers, dozer blades, plows...Standard Equipment• Cat 3 automatic hooks• Cat 3 top link with storage position• Parallel hydraulic hook up with isolating valve• Underaxle frame (sauf SuperSteer)HDI on New Holland T7060 SuperSteerTechnical DataCategoryLift capacityLift rangeHDI3N6000 Kg710 mmors. Ground clearance and manoeuverability are fully retained/ front loaders* / big pack weights* / LAFORGE front PTOs.

LAFORGE offers a range of autonomous front Power Take-Offwith electro-hydraulic multi-discs, modulated wet clutch.Why choose a LAFORGE front PTO■ Optimised installation on the tractor.■ Easy to install.■ Built according to international standards.■ Driveline and torsional damper, ready toinstall on the tractor.Benefits of the Electrohydraulic System:■ Long lasting■ Autonomous hydraulic circuit, withintegrated pump■ Multi-discs wet clutch andmodulated electro-hydraulic engagement■ In cab On/Off switchTechnical characteristics of the LAFORGE front PTOs■ Driven from engine crankshaft.■ Speed light incorporated in the remote control inside the cab.■ Oil cooler included in base price with 3 gears PTO. Optional with 2 gears PTO.Clockwise rotation seen from the frontISO rotation 3 gears 90 HP 540 RPM 6 splinesISO rotation 3 gears 180 HP 1000 RPM 21 splinesCounter Clockwise rotation seen from the frontCounter ISOrotation2 gears 170 HP 1000 RPM 6 splinesThe LAFORGE front hitches are fully compatible with the exclusiveand patented LAFORGE electronic control and dynamic contourfollowing system DYNACONTOUR ® . Gold Medal SIMA 2005.This electronic system dynamically corrects the front hitch position bymeasuring the length of the upper link.DYNACONTOUR ® SYSTEMon Tractor Claas XERIONWithout any adjustment, DYNACONTOUR ®provides real time fi eld contour following andallows for the full benefi t of programmedsequences, thus simplifying headlandoperations.It may also be installed on factory fronthitches, to enhance their performance andefficiency.Check maximum axle load and tire pressure (in relation with travel speed) with tractor and tire manufacturers.LAFORGE’s responsability is limited to our product. Specifi cation and design subject to change without notice. 02/13Ph: (33) 03 23 79 85 85Fax: (33) 03 23 79 81 75commercial@laforge.frwww.laforge.frLAFORGEPôle d’ActivitésF - 02190 GUIGNICOURTThe tractor-implement interaction expertPEF C / 10-31- 1245