Operation Manual - Home Mega Global Solution

PLUG “E” 20 WAYPIN DESCRIPTION CABLENOTESNoSIZE59 Auxiliary input 1 0.5mm Normally Remote start. *Also Wake upinput.* Refer to config source.60 Auxiliary input 2 0.5mm Normally Immediate Shutdown. Referconfig source.61 Auxiliary input 3 0.5mm Normally Delayed Shutdown. Refer configsource.62 Auxiliary input 4 0.5mm Normally Immediate Electrical Trip. Referconfig source.63 Auxiliary input 5 0.5mm Normally Immediate Warning. Refer configsource.64 Auxiliary input 6 0.5mm Normally Delayed Warning. Refer configsource.65 Auxiliary input 7 0.5mm Normally Gen on load input fed fromchange-over device auxiliary. Refer configsource.66 Auxiliary input 8 0.5mm Normally spare. Refer config source.67 Auxiliary input 9 0.5mm Normally Immediate mains dropout selectorinput. Refer config source.68 Auxiliary input 10 0.5mm Normally Low coolant level warning input.Refer config source.69 Auxiliary input 11 0.5mm Normally Low coolant temp warning input.Refer config source.70 Auxiliary input 12 0.5mm Normally spare. Refer config source.71 Auxiliary input 13 0.5mm Normally Auto stop inhibit input. Referconfig source.72 Auxiliary input 14 0.5mm Normally generator load inhibit. Referconfig source.73 Auxiliary input 15 0.5mm Normally external mute input. Refer configsource.74 Auxiliary input 16 0.5mm Normally system lock input. Refer configsource.75 DO NOT USE Ensure no connection is made to this pin76 Mag. Pickup device input 2 core- Connect to MPU77 Mag. Pickup device input -screen Connect to MPU78 Mag. Pickup device screen -cable. Connect cable screen at one end only.NOTE:- Screened cable must be used for connecting the Magnetic Pickup, ensuringthat the screen is earthed at one end ONLY.22607 OPERATING MANUAL ISSUE 1 11/27/00 MR