TeSys E Accessories.pdf - MAXGroupOnline

Accessories for LC1E contactorLAEM1LAEP3LAEP4LAEM6/LAEM7Accessories for motor reverse assemblyContactors with screw clamp terminalsUsing 2 identical contactors Set of power connections Mechanical interlockMechanical interlockCat. no.WeightkgCat. no.WeightkgLC1E06...E12 LAEP1 0.020 LAEM1 0.030LC1E18/E25 LAEP12 0.026 LAEM1 0.030LC1E32/E38 LAEP2 0.040 LAEM1 0.030LC1E40...E65 LAEP3 0.230 LAEM1 0.030LC1E80/E95 LAEP4 0.465 LAEM4 0.095LC1E120/E160 – LAEM5 0.300LC1E200/E250 – LAEM6 0.110LC1E300 – LAEM7 0.250RC surge suppressorb Effective protection for circuits highly sensitive to "high frequency" interferenceand transcient generated when the contactor coil is switched off. For use only incases where the voltage is virtually sinusoidal, i.e. less than 5 % total harmonicdistortion.b Voltage limited to 3 Uc max. and oscillating frequency limited to 400 Hz max.b Slight increase in drop-out time (1.2 to 2 times the normal time).Mounting For use with contactor Cat. no. WeightRatingTypeScrew mounting LC1E06...E95 24...48 LAERCE 0.025Vakg50...127 LAERCG 0.025110...240 LAERCU 0.025380...415 LAERCN 0.025LAERC pLC1E pp19

CharacteristicsTeSys E contactorsAccessories for LC1E contactorInstantaneous auxiliary contact blocks for connection by screwclamp terminalsFor use in normal operating environmentClip-on mountingNumber of contactsper blockCat. no.WeightkgFront 1 NO + 1 NC LAEN11 0.035LAEN22 2 NO LAEN20 0.0352 NC LAEN02 0.0352 NO + 2 NC LAEN22 0.060Time delay auxiliary contact blocks for connection by screw clampterminals 8 A - 690 VClip-onmountingNumber ofcontacts perblockTime delay Setting range Cat. no. (1) WeightTypekgLAETSD Front 1 NO + 1 NC On-delay 1...30 s LAETSD 0.060Instantaneous and time delay contact characteristics(1) For use only LC1E25 to LC1E300.Contact block type LAEN11, 20, 02, 22 LAETSDNumber of contacts 2 or 4 2Rated operational voltage (Ue) Up to V 690Rated insulation voltage (Ui) Conforming to IEC 60947-5-1 690Conventional thermal current (Ith) For ambient temperature A 8 60 °CFrequency of the operationalcurrentHz 50/60Minimum switching capacity U min V 17I min mA 5Short-circuit protection Conforming to IEC 60947-5-1 A 10Rated making capacity Conforming to IEC 60947-5-1 Irms a 140Short-time rating Permissible for 1 s A 100500 ms 120100 ms 140Insulation resistance m > 10Non-overlap timeOverlap timeTime delayMechanical durabilityRated operational power ofcontacts(Conforming to IEC 60947-5-1)Guaranteed between NC and NOcontactsGuaranteed between LAE N22N/C and N/O contactsAmbient air temperature foroperationmsms –1.5 (on energisation and on de-energisation)°C – -20...+70Repeat accuracy – ±2 %Drift up to 0.5 million operatingcyclesDrift depending on ambient airtemperatureIn millions ofoperatingcycles– +15 %– 0.25 % per°C10 4a.c. supply categories AC14/15 V 24 48 115 230 400 4401 million operating cycles VA 60 120 280 560 960 10503 million operating cycles 16 32 80 160 280 30010 million operating cycles 4 8 20 4 70 8020

Accessories for LC1EEnvironmentContact block type LAEN11, 20, 02, 22 LAETSDConforming to standard IEC 60947-5-1Product certificationsProtective treatment Conforming to IEC 60068 "TH"Degree of protection Conforming to IEC 60529 IP20GOSTAmbiant air temperature Storage °C -60...+80Operation -5...+55Permissible for operation at Uc -20...+70Maximum operating altitude Without derating m 3000Connection by cablePhilips N° 2 and Ø 6 mm.Flexible or solid cablewith or without cable endmm 2 Min: 1 x 1Max: 2 x 2.5Accessories compatibilityContactorLC1E06LC1E09LC1E12LC1E18LC1E25LC1E32LC1E38LC1E40LC1E50LC1E65LC1E80LC1E95LC1E120LC1E160LC1E200LC1E250LC1E300(1) Do It Yourself.Built incontacts1 NO or 1NC1 NO + 1NC-LAENpp LAETSD LAERCp LAEM LAEPp1 -1 or 12 or 01 or 111- DIY (1)121