TECHNICAL DATASHEETS - Vandernet

Technical Datasheet: 1204Typical RoofSafe All Membrane AnchorABCDABCDRoofSafe Anchor 90° Corner (7241162)*RoofSafe Anchor 45° Corner (7234084)*RoofSafe Anchor Variable Guide (7234086)*RoofSafe Anchor Intermediate Guide (7234085)*RoofSafe Anchor System Eye & Pin (7241161)RoofSafe Anchor Throw Plate Kit (7241166)*RoofSafe Anchor Single Point Eye EMEA (7241167)*RoofSafe Anchor Module EC All Mem (7241147)RoofSafe Anchor Module Int All Mem (7241148)*RoofSafe Anchor Baseplate 405x405 H (7241136)RoofSafe Anchor Baseplate 405x405 BL (7241137)*RoofSafe Anchor Baseplate 305x440 H (7241138)*RoofSafe Anchor Baseplate 350x440 BL (7241139)*RoofSafe Anchor Baseplate 550x450 BL (7241140)*RoofSafe Anchor Toggle Fixings 150mm x 4 (7234031)RoofSafe Anchor Toggle Fixings 300mm x 4 (7234032)*RoofSafe Anchor Concrete Fixings 150mm x 4 (7234023)*RoofSafe Anchor Concrete Fixings 300mm x 4 (7234024)*158mm (6.22”)For more detailed component information refer to the individualdatasheets. *This item is different from the one illustrated.APPLICATIONSelect appropriate top component (A), module (B), baseplate (C) and fi xings (D) to make up the correct confi guration.Note: Sealing of the roof anchor should be done to the membrane manufacturers technical specifi cation.COMPONENT SPECIFICATIONMATERIALFINISHQUALITY316 Stainless Steel / Aluminium / Steel Components throughoutElectropolished / Anodised / Zinc Coated100% Visual InspectionCONFORMITY EN 795 Class C, OSHA Compliant, AS/NZS 1891.2Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 29

Technical Datasheet: 1157RoofSafe Anchor 1P EMEAPart No: 7241157A226mm (8.90”)BCABRoofSafe Anchor Single Point Eye EMEARoofSafe Anchor Module Int BitCRoofSafe Anchor Baseplate 405x405 H405mm (15.94”)APPLICATIONRoofSafe Anchor 1P EMEA is to be used as a single attachment point for top fi x applications for one user.Note: If attachment of two users is required, please use RoofSafe Anchor 2P EMEA (7241158).COMPONENT SPECIFICATIONMATERIALFINISHWEIGHTStainless Steel / Aluminium / Steel Components ThroughoutElectropolished / Anodised / Zinc Coated2.48kg (5.47lbs)QUALITY ISO 9001CONFORMITYEN 795 Class A2Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 11 2

Technical Datasheet: 1196RoofSafe Anchor Baseplate 405 x 405 HPart No: 7241136405mm (15.94”)367mm (14.44”)334mm (13.15”)304mm (11.97”)275mm (10.83”)200mm (7.87”)3mm (0.12”)405mm (15.94”)347mm (13.66”)333mm (13.11”)300mm (11.81”)250mm (9.84”)200mm (7.87”)Ø27mm (1.06”) TypØ8.2mm (0.32”) TypAPPLICATIONRoofSafe Anchor Baseplate 405 x 405 H can be used on any compatible roof type in conjunction with the appropriate RoofSafe Anchor Module, top component and fi xing solution.COMPONENT SPECIFICATIONMATERIALFINISHWEIGHTAluminiumAnodised1.38kg (3.04lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 12 2

Technical Datasheet: 1197RoofSafe Anchor Baseplate 405 x 405 BLPart No: 7241137405mm (15.94”)3mm (0.12”)405mm (15.94”)APPLICATIONRoofSafe Anchor Baseplate 405 x 405 BL can be used on any compatible roof type in conjunction with the appropriate RoofSafe Anchor Module, top component and fi xing solution.The baseplate is left blank to allow the installer to drill holes to the appropriate width using RA Drilling Fixture (see datasheet 1219).COMPONENT SPECIFICATIONMATERIALFINISHWEIGHTAluminiumAnodised1.41kg (3.11lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 13 2

Technical Datasheet: 1198RoofSafe Anchor Baseplate 350 x 440 HPart No: 7241138405mm (15.94”)405mm (15.94”)3mm (0.12”)405mm (15.94”)405mm (15.94”)Ø8.2mm (0.32”) TypØ10.5mm (0.41”) TypAPPLICATIONRoofSafe Anchor Baseplate 350 x 440 H can be used on any compatible roof type in conjunction with the appropriate RoofSafe Anchor Module, top component and fi xing solution.10.5mm holes are suitable for clamps on standing seam roofs. 8.2mm holes are suitable for rivets on trapezoidal (sp) roofs.COMPONENT SPECIFICATIONMATERIALFINISHWEIGHTQUALITYAluminiumAnodised1.25kg (2.76lbs)100% Visual InspectionIssue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 14 2

Technical Datasheet: 1199RoofSafe Anchor Baseplate 350 x 440 BLPart No: 7241139440mm (17.32”)3mm (0.12”)350mm (13.78”)APPLICATIONRoofSafe Anchor Baseplate 350 x 440H can be used on any compatible roof type in conjunction with the appropriate RoofSafe Anchor Module, top component and fi xing solution.The baseplate is left blank to allow the installer to drill holes to the appropriate width using RA Drilling Fixture (see datasheet 1219).COMPONENT SPECIFICATIONMATERIALFINISHWEIGHTQUALITYAluminiumAnodised1.33kg (2.94lbs)100% Visual InspectionIssue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 15 2

Technical Datasheet: 1200RoofSafe Anchor Baseplate 550 x 450 BLPart No: 7241140550mm (21.65”)3mm (0.12”)450mm (17.72”)APPLICATIONRoofSafe Anchor Baseplate 550x450 BL can be used on any compatible roof type in conjunction with the appropriate RoofSafe Anchor Module, top component and fi xing solution.The baseplate is left blank to allow the installer to drill holes to the appropriate width using RA Drilling Fixture (see datasheet 1219).COMPONENT SPECIFICATIONMATERIALFINISHWEIGHTQUALITYAluminiumAnodised210kg (4.63lbs)100% Visual InspectionIssue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 16 2

Technical Datasheet: 1219RoofSafe Anchor Drilling FixturePart No: 724121020mm (0.78”)Ø4mm (0.16”)APPLICATIONRoofSafe Anchor Drilling Fixture is used in conjuction with blank baseplates to assist in drilling holes for use with RoofSafe Rivets.COMPONENT SPECIFICATIONMATERIALFINISHWEIGHTAluminiumNatural0.27kg (0.60lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 17 2

Technical Datasheet: 1141RoofSafe Anchor Module End / Corner Top FixPart No: 7241141M12 Nut & Nut CapA190mm (7.48”)142mm (5.59”)BCØ99mm (3.9”)ABCCanCoilFixingsAPPLICATIONRoofSafe Anchor Module is to be used in conjuction with relevent baseplate and top component to create an end or corner anchor for top fi x applications.COMPONENT SPECIFICATIONA B CMATERIAL Aluminium Steel A470 Stainless SteelFINISH Anodised Zinc Coating NaturalWEIGHT2.53kg (5.57 lbs)QUALITY100% Visual InspectionIssue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 18 2

Technical Datasheet: 1142RoofSafe Anchor Module Intermediate Top FixPart No: 7241142A190mm (7.48”)142mm (5.59”)Ø99mm (3.9”)AM12 Nut & Nut CapAPPLICATIONRoofSafe Anchor Module is to be used in conjuction with relevent baseplate and top component to create an intermediate anchor for top fi x applications.COMPONENT SPECIFICATIONCAN INTERMEDIATE CORE FIXINGSMATERIAL Aluminium Steel / Stainless Steel A470 Stainless SteelFINISH Anodised Zinc Coating / Natural NaturalWEIGHT0.51kg (1.11lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 19 2

Technical Datasheet: 1143RoofSafe Anchor Module End / Corner BitumenPart No: 7241143A158mm (6.22”)217mm (8.54”)Ø342mm (13.46”)AM12 Nut & Nut CapAPPLICATIONRoofSafe Anchor Module is to be used in conjuction with relevent baseplate and top component to create an end or corner anchor for bitumen applications.COMPONENT SPECIFICATIONWEATHER SHROUD COIL FIXINGSMATERIAL Aluminium Steel A470 Stainless SteelFINISH Anodised Zinc Coating NaturalWEIGHT2.80kg (6.17lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 202

Technical Datasheet: 1144RoofSafe Anchor Module Intermediate BitumenPart No: 7241144A158mm (6.22”)205mm (8.07”)Ø342mm (13.46”)AM12 Nut & Nut CapAPPLICATIONRoofSafe Anchor Module is to be used in conjuction with relevent baseplate and top component to create an end or corner anchor for bitumen applications.COMPONENT SPECIFICATIONWEATHER SHROUD INTERMEDIATE CORE FIXINGSMATERIAL Aluminium Steel / Stainless Steel A470 Stainless SteelFINISH Anodised Zinc Coating / Natural NaturalWEIGHT0.78kg (1.72lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 212

Technical Datasheet: 1145RoofSafe Anchor Module End / Corner PVCPart No: 7241145A158mm (6.22”)205mm (8.07”)Ø342mm (13.46”)AM12 Nut & Nut CapAPPLICATIONRoofSafe Anchor Module is to be used in conjuction with relevent baseplate and top component to create an end or corner anchor for PVC applications.COMPONENT SPECIFICATIONWEATHER SHROUD COIL FIXINGSMATERIAL Aluminium Steel A470 Stainless SteelFINISH PVC Coated Zinc Coating NaturalWEIGHT2.95kg (6.50lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 222

Technical Datasheet: 1146RoofSafe Anchor Module Intermediate PVCPart No: 7241146A158mm (6.22”)205mm (8.07”)Ø342mm (13.46”)AM12 Nut & Nut CapAPPLICATIONRoofSafe Anchor Module is to be used in conjuction with relevent baseplate and top component to create an intermediate anchor for PVC applications.COMPONENT SPECIFICATIONWEATHER SHROUD INTERMEDIATE CORE FIXINGSMATERIAL Aluminium Steel / Stainless Steel A470 Stainless SteelFINISH PVC Coated Zinc Coating / Natural NaturalWEIGHT0.93kg (2.05lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 232

Technical Datasheet: 1147RoofSafe Anchor Module End / Corner All MembranePart No: 7241147AØ114mm (4.49”)144mm (5.67”)191mm (7.52”)5.5mm (0.22”)AM12 Nut & Nut CapAPPLICATIONRoofSafe Anchor Module is to be used in conjuction with relevent baseplate and top component to create an end or corner anchor for all membrane applications.COMPONENT SPECIFICATIONCAN / WEATHER CAP COIL FIXINGSMATERIAL Aluminium / ABS Plastic Steel A470 Stainless SteelFINISH Anodised / Natural Zinc Coating NaturalWEIGHT2.59kg (5.70lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 242

Technical Datasheet: 1148RoofSafe Anchor Module Intermediate All MembranePart No: 7241148A144mm (5.67”)191mm (7.52”)Ø114mm (4.49”)5.5mm (0.22”)AM12 Nut & Nut CapAPPLICATIONRoofSafe Anchor Module is to be used in conjuction with relevent baseplate and top component to create an intermediate anchor for all membrane applications.COMPONENT SPECIFICATIONCAN / WEATHER CAP INTERMEDIATE CORE FIXINGSMATERIAL Aluminium / ABS Steel / Stainless Steel A470 Stainless SteelFINISH Anodised / Natural Zinc Coating / Natural NaturalWEIGHT0.57kg (1.25lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 252

Technical Datasheet: 1313Uni 8 8mm Hex Swage Tensioner 0.8kNPart No: 7240166ABDC400mm (15.75”)EAClevis PinBCotter PinCDTension Indicator DiscLock NutFETurn BuckleFLock NutGGStudAPPLICATIONThe Uni 8 tensioner unit is attached to the anchor point using the clevis pin and split pin. It is used to set the tension of the cable in horizontal applications.Refer to installation instructions for information on assembly and installation.For use with 8mm 1x19 or 7x7 wire only. 19kN max permitted cable tension, min break strength 38kN.COMPONENT SPECIFICATIONMATERIALFINISHWEIGHTQUALITY316 Stainless SteelNatural / Electropolished0.85kg (1.87 lbs)100% Visual InspectionIssue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 262

Technical Datasheet: 0906Uni 8 8mm Hex Swage TogglePart No: 723401128mm (1.10”)30mm (1.18”)18mm (0.71”)Ø12.7mm (0.5”)82mm (3.23”)179mm (7.05”)APPLICATION12.5mm (0.63”)Before SwagingUsed to hold the cable fi rmly in place at one end of the system. For use with 8mm 1x19 or 7x7 wire only. Refer to installation instructions for information on assembly and installation.19kN max permitted arrest load, min break strength 38kN.COMPONENT SPECIFICATIONMATERIALFINISHWEIGHTQUALITY316 Stainless SteelNatural0.33kg (0.73 lbs)100% Visual InspectionIssue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 272

Technical Datasheet: 0917Uni 8 8mm Hex Swage JoinerPart No: 7234012AB79mm (3.11”)190mm (7.48”) before swaging200mm (7.87”) after swagingAB8mm 1x19 or 7x7Stainless SteelCable*Uni 8 8mm HexSwage JoinerA*Order Separately.APPLICATIONUsed to join two sections of cable together. For use with 8mm 1x19 or 7x7 wire only. Refer to installation instructions for information on assembly and installation.19kN max permitted cable tension, min break strength 38kN.COMPONENT SPECIFICATIONMATERIALFINISHWEIGHTQUALITY316 Stainless SteelNatural0.12kg (0.73 lbs)100% Visual InspectionIssue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 282

Technical Datasheet: 12178mm 7x7 SS Cable /MPart No: 7240211Ø8mmAPPLICATIONFor use in RoofSafe Cable and Uni 8 horizontal applications. Minimum Break Strength 38.7kN (8700.1lbf)Note: Can also be purchased on a 1000m drum (3 280.8ft) (Part Number: 7240219)COMPONENT SPECIFICATIONMATERIAL316 Stainless SteelFINISHNaturalWEIGHT 0.27kg /MQUALITY100% Visual Inspection. 100% Molybdenum TestedIssue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 292

Technical Datasheet: 12188mm UniGrab & CarabinerPart No: 723402060mm (2.36”)A63mm (2.48”)B26mm (1.02”)Ø15.5mm (0.61”)AUniGrab4.5 - 6.1mm (0.18” - 0.24””)BCarabinerAPPLICATIONFor use as an attachment device for a single user in conjuction with the Uni 8 and RoofSafe Cable systems. Note: Maximum user weight 136kg.Only to be used with carabiner provided.To prolong the life of the product, do not leave on the system when not in use.COMPONENT SPECIFICATIONAMATERIAL 316 Stainless Steel SilverFINISH Electropolished Silver Zinc PassivateWEIGHT0.42kg (0.93 lbs))BQUALITY100% Visual, alignment and interface checksIssue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 30 2

Technical Datasheet: 1210RoofSafe Anchor 90° CornerPart No: 7241162Ø12.5mm (0.49”)R200 (7.87”)68.5mm (2.70”)APPLICATIONTo be fi tted on top of a RoofSafe Anchor creating a 90 degree corner in an 8mm RoofSafe Cable System. M12 A470 SS Bolt, Nyloc Nut & Washer as supplied with post.Note: Cannot be used with old style Force Management Anchors.COMPONENT SPECIFICATIONMATERIALFINISHWEIGHT316 Stainless SteelElectropolished0.43kg (0.95lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 31 2

Technical Datasheet: 1211RoofSafe Anchor 45° CornerPart No: 7241163Ø12.5mm (0.49”)R200 (7.87”)68.5mm (2.70”)APPLICATIONTo be fi tted on top of a RoofSafe Anchor creating a 45 degree corner in an 8mm RoofSafe Cable System. M12 A470 SS Bolt, Nyloc Nut & Washer as supplied with post.Note: Cannot be used with old style Force Management Anchors.COMPONENT SPECIFICATIONMATERIALFINISHWEIGHT316 Stainless SteelElectropolished0.32kg (0.71lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 32 2

Technical Datasheet: 1056RoofSafe Anchor Variable GuidePart No: 7234086420mm (16.54”)Ø12mm (0.47”)Ø9mm (0.35”)68.5mm (2.70”)Ø12.5mm (0.49”)APPLICATIONTo be fi tted on top of a RoofSafe Anchor creating a variable corner in an 8mm RoofSafe Cable System. M12 A470 SS Bolt, Nyloc Nut & Washer as supplied with post.Note: To be used ONLY on end/corner anchors. Do not fi t to Intermediate anchors. See installation instructions for bending details.COMPONENT SPECIFICATIONMATERIALFINISHWEIGHT316 Stainless SteelElectropolished0.32kg (0.71lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 33 2

Technical Datasheet: 1038RoofSafe Anchor Intermediate GuidePart No: 7234085Ø12mm (0.47”)Ø12mm (0.47”)Ø9mm (0.35”)80mm (3.15”)68.5mm (2.70”)APPLICATIONTo be fi tted to an Intermediate RoofSafe Anchor in an 8mm RoofSafe Cable System. M12 A470 SS Bolt, Nyloc Nut & Washer as supplied with post.Note: To be used ONLY on Intermediate Anchors. Do not fi t to end/corner anchors.COMPONENT SPECIFICATIONMATERIALFINISHWEIGHT316 Stainless SteelElectropolished0.13kg (0.29lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 34 2

Technical Datasheet: 1135RoofSafe Anchor System Eye & PinPart No: 7241161Ø12.5mm (0.49”)58.6mm (2.31”)BAC80mm (3.15”)ARoofSafe Anchor System EyeBRoofSafe Anchor System Eye PinAPPLICATIONTo be fi tted to an End Anchor in an 8mm RoofSafe Cable System. M12 A470 SS Bolt, Nyloc Nut & Washer as supplied with post.Note: To be used ONLY on End/Corner Anchors. Do not fi t to Intermediate Anchors.CSplit PinCOMPONENT SPECIFICATIONMATERIALFINISHWEIGHT316 Stainless SteelElectropolished0.34kg (0.75lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 35 2

Technical Datasheet: 1167RA Single Point Eye EMEAPart No: 7241167Ø30mm (1.18”)Ø12.1mm (0.48”)A57.4mm (2.26”)BØ50mm (1.97”)C69.2mm (2.72”)ARA Single Point Eye EMEABM12 WasherAPPLICATIONUsed in conjuction with RoofSafe Anchors to create a single point attachment for 1 or 2 users.CRA Rotation SleeveCOMPONENT SPECIFICATIONMATERIALFINISHWEIGHT316 Stainless SteelPolished0.34kg (0.75lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 36 2

Technical Datasheet: 1308Uni 8 evolution TravellerPart No: 7240100D27mm (1.12”)BACABCDAnchorage RingBodyFriction Reducing RollersPlastic PartsAPPLICATIONThe Uni 8 evolution Traveller is the interconnecting element between the user and the lifeline.Automatic pass through over intermediate brackets and curves means that the user can stay connected to the lifeline permanently.READ COMPONENTSELECTION GUIDELINESCOMPONENT SPECIFICATIONA B C DMATERIAL Aluminium T6 316L Stainless Steel Polyamide Anti-UV PolyamideFINISHNaturalWEIGHT0.63kg (1.4 lbs)QUALITY100% Visual InspectionIssue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 37 2

Technical Datasheet: 1028RoofSafe Anchor Throw Plate KitPart No: 7241166ACBD140mm (5.51”)50mm (1.97”)ABM12x25 Set ScrewM12 Flat WasherØ12.5mm (0.49”)CDRoofSafe Anchor Throw PlateM12 Nyloc NutAPPLICATIONFor use with a RoofSafe End / Corner Anchor to allow two systems to intersect on the same post.Note: Additional fasteners are provided to attach the plate. RoofSafe Anchor sold seperately.Cannot be used with old style Force Management Anchors.COMPONENT SPECIFICATIONMATERIALFINISHWEIGHT316 Stainless SteelElectropolished0.164kg (5.78lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 38 2

Technical Datasheet: 1059RoofSafe 7.7 RivetPart No: 7234005 (Qty 100) 7234006 (Qty 500)ABCDARivetBNeoprene WasherCBaseplateDSealing TapeAPPLICATIONUsed in conjunction with RoofSafe Anchors and RoofSafe Rail for installation on trapezoidal roof profi les (composite/built up/secret fi x) and for joining RoofSafeRail to spreader plates.Single Rivet - Shear Strength = 6.8kN / Tensile Strength = 5kN / Grip Range = 1 to 9.5mmCOMPONENT SPECIFICATIONRIVETWASHERMATERIAL 6000 Series Aluminium Alloy A470 Stainless SteelFINISHNaturalWEIGHT 0.67kg (1.48lbs) per 100QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 39 2

Technical Datasheet: 0867RoofSafe Maxi Clamp ZPart No: 7234028C45mm (1.77”)A51mm (2.01”)BEF50mm (1.97”)ABodyDBCInsertM10x20 FastenerD3/8” x 1/2” Set ScrewAPPLICATIONUsed to attach RoofSafe Anchors and RoofSafe Rail to bulb type standing seam roof profi les.EFM10 Spring WasherM10 Flat WasherCOMPONENT SPECIFICATIONBODY & INSERTFASTENERSMATERIAL 6000 Series Aluminium Alloy A470 Stainless SteelFINISHNaturalWEIGHT0.26kg (9.17oz)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 40 2

Technical Datasheet: 0868RoofSafe Maxi Clamp EPart No: 7234008ACED6.9mm (0.27”)B25mm (0.98”)50mm (1.97”)30mm (1.18”)ABodyB3/8” x 1/2” Set ScrewCM10x20 FastenerAPPLICATIONUsed to attach the RoofSafe Rail and RoofSafe Anchors to a variety of standing seam roof profi les.DEM10 Flat WasherM10 Spring WasherCOMPONENT SPECIFICATIONBODYFIXINGSMATERIAL 6000 Series Aluminium Alloy A470 Stainless SteelFINISHNaturalWEIGHT0.13kg (4.59oz)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 41 2

Technical Datasheet: 1206RoofSafe Maxi Clamp UPart No: 7234029ADCEB10mm (0.39”)38mm (1.50”)50mm (1.97”)38mm (1.50”)ABodyB3/8” x 1/2” Set ScrewCM10x20 FastenerAPPLICATIONUsed to attach the RoofSafe Rail and RoofSafe Anchors to a variety of standing seam roof profi les.DEM10 Flat WasherM10 Spring WasherCOMPONENT SPECIFICATIONBODYFIXINGSMATERIAL 6000 Series Aluminium Alloy A470 Stainless SteelFINISHNaturalWEIGHT0.218kg (7.69oz)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 42 2

Technical Datasheet: 0965RoofSafe Anchor Concrete Fixing 150mm x 4Part No: 7241180Concrete with InsulationABC150mm (5.91”)Hollow Core Concretewith InsulationADBCDANew MembraneBExisting MembraneCInsulationAPPLICATIONUsed in conjunction with RoofSafe Anchors and RoofSafe Rail for installation into concrete.Note: suitable for solid (min strength of 25N/mm²) or hollow (min strength of 55N/mm²) concrete.DConcreteCOMPONENT SPECIFICATIONALIGNMENT TUBEFIXINGSMATERIAL PVC SteelFINISH Natural Zinc CoatedWEIGHT0.603kg (1lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 43 2

Technical Datasheet: 1205RoofSafe Anchor Concrete Fixing 300mm x 4Part No: 7241181Concrete with InsulationABC300mm (11.81”)Hollow Core Concretewith InsulationADBCDANew MembraneBExisting MembraneCInsulationAPPLICATIONUsed in conjunction with RoofSafe Anchors and RoofSafe Rail for installation into concrete.Note: suitable for solid (min strength of 25N/mm²) or hollow (min strength of 55N/mm²) concrete.DConcreteCOMPONENT SPECIFICATIONALIGNMENT TUBEFIXINGSMATERIAL PVC SteelFINISH Natural Zinc CoatedWEIGHT0.971kg (34.25oz)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 44 2

Technical Datasheet: 1208RoofSafe Anchor Toggle Fixing 150mm x 4Part No: 7241182150mm (5.91”)BACDANew MembraneBExisting MembraneCInsulationAPPLICATIONUsed in conjunction with RoofSafe Anchors for installation on fl at roofs on trapazoidal and plywood deck (Min 18mm (0.71”) thick).DDeckCOMPONENT SPECIFICATIONALIGNMENT TUBEFIXINGSMATERIAL PVC SteelFINISH Natural Zinc CoatedWEIGHT0.755kg (26.63oz)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 45 2

Technical Datasheet: 1209RoofSafe Anchor Toggle Fixing 300mm x 4Part No: 7241183300mm (11.81”)BACDANew MembraneBExisting MembraneCInsulationAPPLICATIONUsed in conjunction with RoofSafe Anchors for installation on fl at roofs on trapazoidal and plywood deck (Min 18mm (0.71”) thick).DDeckCOMPONENT SPECIFICATIONALIGNMENT TUBEFIXINGSMATERIAL PVC SteelFINISH Natural Zinc CoatedWEIGHT1.14kg (2.52lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 46 2

Technical Datasheet: 1212RoofSafe Anchor Rivertherm Bearer KitPart No: 7241172ACB600mm (23.62”)A Bulb Tite Rivets (5.2 x 19.1)B Butyl Tape (Class A)C CA Rivertherm RT 500APPLICATIONUsed to attach RoofSafe Anchors to CA Rivertherm roof profi les.Note: RoofSafe Anchor sold seperately. Pack contains 2 bearers, suitable for a one anchor.COMPONENT SPECIFICATIONMATERIALFINISHWEIGHT5000 Series Aluminium AlloyPowder Coated0.80g (1.76oz)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 47 2

Technical Datasheet: 1213RoofSafe Anchor SpeedDeck Bearer KitPart No: 7241173ABCD350mm (13.78”)300mm (11.81”)ABCRoofSafe Anchor Module EC Top Fix(7241141)*M8 x 20 A470 BoltRoofSafe Anchor Baseplate305x440 H (7241138)*D Bulb Tite Rivet 5.2 x 19.1APPLICATIONUsed in conjunction with RoofSafe Anchors for installation on SpeedDeck roof profi les.Note: RoofSafe Anchor Module and Baseplate sold seperately. For use on roof sheets from: Steel 0.42mm / Aluminium 0.7mm.Pack contains 2 bearers, suitable for a one anchor.*Order SeperatelyCOMPONENT SPECIFICATIONMATERIALFINISHWEIGHT6000 Series Aluminium AlloyPowder Coated0.55g (1.21lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 48 2

Technical Datasheet: 1216RoofSafe Anchor Standing Seam BearerPart No: 7241236ABCD1050mm (41.34”)1000mm (39.37”)50.8mm (2”)ABCDRoofSafe Anchor Module EC Top Fix(7241141)*RoofSafe 7.7 Rivet 100 (7234005)RoofSafe 7.7 Rivet 500 (7234006)RoofSafe Anchor Baseplate405x405 H (7241136)*ClampAPPLICATIONUsed in conjunction with RoofSafe Anchors for installation on standing seam roof profi les with a seam width of greater than 500mm.Note: RoofSafe Anchor and Clamps sold seperately. Pack contains 2 bearers, suitable for one anchor. Seam width to be specifi ed at the time of order.*Order SeperatelyCOMPONENT SPECIFICATIONMATERIALFINISHWEIGHT6000 Series Aluminium AlloyPowder Coated1.46kg (3.22lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 49 2

Technical Datasheet: 1322RoofSafe Anchor Standing Seam Bearer 600mmPart No: 7241175ABCD650mm (25.6”)600mm (23.6”)50.8mm (2”)ABCDRoofSafe Anchor Module EC Top Fix(7241141)*RoofSafe 7.7 Rivet 100 (7234005)RoofSafe 7.7 Rivet 500 (7234006)RoofSafe Anchor Baseplate405x405 H (7241136)*ClampAPPLICATIONUsed in conjunction with RoofSafe Anchors for installation on standing seam roof profi les with a seam width of greater than 500mm.Note: RoofSafe Anchor and Clamps sold seperately. Pack contains 2 bearers, suitable for one anchor. Seam width to be specifi ed at the time of order.*Order SeperatelyCOMPONENT SPECIFICATIONMATERIALFINISHWEIGHT6000 Series Aluminium AlloyNatural1.46kg (3.22lbs)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 50 2

Technical Datasheet: 1096RoofSafe Anchor Tag EMEA L APart No: 7241232Installation Date / Installatiedatum / Fecha de instalación / Montagedatum /Date d’installation / Data da instalação / Data installazione / InstallationsdatumInstalled By / Geïnstalleerd door / Instalado Por / Montiert durch / Installateur / Instalado por / Installato da / Installerad avContact Number / Contactnr. / Tel. de contacto / Kontakttelefon / Téléphone / Nº de Contacto / Numero contatto / Kontaktnummer90mm (3.54”)Min. Ground Clearance (m) / Min. vrije valruimte (m) / Distancia minima hasta el suelo (m) / Mindestabstand zum Boden (m) / Hauteur libre minimale (m) / Altura mínima livre (mt) /Distanza libera minima da terra (m) / Min. höjd ovanför markenMax. Users Per System / Max. aantal gebruikers per systeem / Máximo de usuarios por sistema / Maximale Benutzer pro System / Nombre maximal d’utilisateurs parsystème / Nº máximo de utilizadores por linha / N. utenti max. per sistema / Max. användare per systemMax. Users Per Span / Max. aantal gebruikers per overspanning / Máximo de usuarios por vano / Höchstzahl der Benutzer pro Spannweite / Nombre maximald’utilisateurs par portée / Nº máximo de utilizadores por vão / N. utenti max. per sezione / Max. användare per skenaNext Service Date / Datum volgende keuring / Próxima fecha de revisión / Termin der nächsten Wartung/ Prochaine date d’entretien / Data da próxima Inspecção / Data prossima manutenzione / NästaservicedatumSystem Serial No. / Serienummer / Número de serie del sistema / Seriennummer des Systems / Numéro de série / Nº de série do sistema / N. di serie sistema / Systemetsserienr.EN795:1996 Class COSHA COMPLIANTAS/NZS 1891.2Use Energy Absorbing Lanyards / Gebruik energie-absorberende verbindingslijnen / Utilice acolladores de absorción de energía / Verwenden Sie falldämpfendeSicherheits-/Anschlagseile / Utilisez des longes à absorption d’énergie / Usar cordas com amortecedor de energia / Utilizzare funi ad assorbimento d’energia / Användenergiupptagande taljerepwww.capitalsafety.com214.6mm (8.45”)APPLICATIONFor use on all cable systems (Languages: English, Spanish, Dutch, German, French, Portuguese, Italian and Swedish).Must be attached in a visible location near the start of the system. It is completed by the installer with essential information for the user.COMPONENT SPECIFICATIONMATERIAL Aluminium 5005FINISHWEIGHTAnodised. Screen printed & low temperature baked.9g (0.32oz)QUALITY ISO 9001Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 51 2

Technical Datasheet: 1326Tools ListPowerBird Rivet Gun 7241102Manual Rivet Gun 72411037.7 Rivet Gun Head 7241104PowerBird Gun Jaws 7241105PowerBird Gun Nose 7241106RA Drill Stop Gauge 7241111RA Concrete Setting Tool 7241112Male Torque Handle 7241118Hex Swager c/w Die Set 7241119Hew Swager w/o Die Set 7241120Hex Swage Die Set 10mm 7241122Cable Grip 72411238mm Cable Tester Kit 7241124Eyebolt Tester Kit 72411258mm Cable/Eyebolt Tester 7241126RA Removal Spanner 9600043RA 6mm Hex Drive Bit 9600044Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 52 2

EUROPE, MIDDLE EAST& AFRICAFranceLe Broc CenterZ.I. 1re Avenue – BP1506511 Carros Le Broc CedexFRANCEt: +33 (0)4 97 10 00 10f: +33 (0)4 93 08 79 70United Kingdom5a Merse RoadNorth Moons MoatRedditch, WorcestershireB98 9HL UKt: +44 (0) 1527 548 000f: +44 (0) 1527 591 000DubaiME Branch Offi cePO Box 17789JAFZA, Dubai – U.A.Et: 00 800 999 55500f: +33 (0)4 93 08 79 70GermanyHagener Strasse 44, D-57489,Drolshagen,Germanyt: +49 (0) 2 76 18 33 82 29f: +33 (0)4 93 08 79 70GLOBAL LEADER IN FALL PROTECTIONCapital Safety is one of the world’s leading manufacturers of fall protection and rescue equipment,with decades of experience and a legacy of innovation.We understand the industries we serve and listen to the workers in the field. We employ the best engineersto create innovative solutions and patent the products that keep workers safe at heights aroundthe world. Capital Safety has the best quality and largest range of fall protection productsin the industry. But we’re more than a product company.We take an innovative approach in bringing our products to the field. We have created internationalpartnerships and a vast network of authorized distributors, certified installers and service centres.We offer on-site and in-house training.Look for complete solutions in our extensive line of DBI-SALA ® and Protecta ® products.CUSTOMER SERVICES00 800 999 55500information@capitalsafety.comwww.capitalsafety.comAll rights reserved. The material contained herein is copyrighted; no part of this publication may bereproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic,mechanical, photocopying, recording or otherwise without prior written permission from Capital Safety.Ref: XXXXXXXX