MSDS - Insulation Supplies

Touch ‘n Seal® All Seasons Polyurethane Foam SealantTouch ‘n Seal Desert Formula Polyurethane Foam SealantRevision Date 01 Oct 2009Clean Water ActThis product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.).CERCLAThis material, as supplied, contains one or more substances regulated as a hazardous substance under the ComprehensiveEnvironmental Response Compensation and Liability Act (CERCLA) (40 CFR 302).Chemical Name Hazardous Substances RQs Extremely Hazardous Substances RQsMethylene bisphenyl isocyanate (MDI)5000 lbU.S. State RegulationsCalifornia Proposition 65WARNING! This product contains a chemical(s) known to the State of California to cause cancer, or birth defects or other reproductive harm.(concentration < 0.1%)U.S. State Right-to-Know RegulationsChemical Name Massachusetts New Jersey Pennsylvania Illinois Rhode IslandDimethyl ether X X X XPropane X X X XIsobutane X X XMethylene bisphenylisocyanate (MDI)X X X X XInternational RegulationsMexico - GradeThe exposure limits values for 101-68-8 are listed under two synonyms:Diphenylmethane diisocyanate - 0.02 ppm TWA; 0.2 mg/m 3 TWAMethylene bisphenyl isocyanate - 0.005 ppm TWA; 0.051 mg/m 3 TWAChemical Name Carcinogen Status Exposure LimitsMethylene bisphenyl isocyanate (MDI)Mexico: TWA= 0.02 ppmMexico: TWA= 0.2 mg/m 3Diphenylmethane diisocyanateMexico: TWA= 0.005 ppmMexico: TWA= 0.051 mg/m 3CanadaThis product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and theMSDS contains all the information required by the CPR.WHMIS Hazard ClassA Compressed gasesB5 Flammable aerosolD2B Toxic materialsChemical NameMethylene bisphenyl isocyanate (MDI)NPRIXPage 9