Bracket range 2012 | Sapa - D+H Mechatronic

CDC bracket sets forMounting solutions for bottom-hung windows,Overview side-hung profile windows series incl. outer frame and sash frameArguments Outer frame profiles for D+H installation solutionsEfficiency• Time-saving installation through optimum adaptation of thebracket set to the particular profile systemSash profilesDesign• No visible fixing materialEN 12101-2 tested• Solutions tested as complete systems for smoke and heatvent applications according to DIN EN 12101-2Quick fitting• Brackets are ready for immediate fitting – no additionaladaptation work on the brackets is necessaryRetains the centre seal• The motor cover included guarantees an optimum fixing of thecentre sealSimple chain disconnection• Disconnection of chain also possible when the window isclosedComplete scope of supply• All materials necessary for fixing are included in the scope ofsupply of the bracket setSpecial colours• The sash bracket can be supplied in a special colour as anoption, according to RAL Classic (colour chart RAL-K5)(wet-painted or powder-coated)Simple application overview• Easy selection of the correct fittings with the D+H applicationtableDocumentation• Application drawings suitable for window and facademanufacturers availablePage 4D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

CDC bracket sets for®Sapa Serie SFB 1074ApplicationInward Projected opening top-hung bottom-hung vent, outward window openingInward opening side-hung windowAttention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width!Product informationTypeArt. no. setInstallation typeFrame material usedAD drawing numberCDC, 350 all versions housingCDC, 600 housingCDC-BS069-VFO25.AFZ.KSsurfaced mountingaluminium windowsAD00230ComponentsSash bracket / art. no.Frame bracket / art. no.Cover plate /art. no.CDC-BS069-VFOCDC-SB025 / 25.AGB.KSCDC-FB014 / 25.AFU.KSScope of supplyComplete, including fixing materials*See the application overview for CDC bracket sets on the reverse for detailed information about the profile seriesCDC-BS069-VFO© 2012 D+H Mechatronic AG, AmmersbekD+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 9Series CDC

CDC bracket sets forOverview profile series incl. outer frame and sash frameOuter frame profilesSapa ® Series SFB 107474311 74053Sash profilesPage 10D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

CDC bracket sets for®Sapa Series SFB 1074 with additional profileApplicationInward Projected opening top-hung bottom-hung vent, outward window openingInward opening side-hung windowAttention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width!Product informationTypeArt. no. setInstallation typeFrame material usedAD drawing numberCDC, 350 all Versions housingCDC, 600 housingCDC-BS070-VFO25.AGC.KSsurfaced mountingaluminium windowsAD00231ComponentsSash bracket / art. no.Frame bracket / art. no.Cover plate /art. no.CDC-BS070-VFOCDC-SB025 / 25.AGB.KSCDC-FB015 / 25.AGD.KSScope of supplyComplete, including fixing materials*See the application overview for CDC bracket sets on the reverse for detailed information about the profile seriesCDC-BS070-VFO© 2012 D+H Mechatronic AG, AmmersbekD+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 11Series CDC

CDC bracket sets forOverview profile series incl. outer frame and sash frameOuter frame profilesSapa ® Series SFB 1074Sash profiles7400174002740527400574101741027401374004740077410374107740037410674311Page 12D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

CDC bracket sets forColour optionCDC-BS/C (25.ACV.KS)Order Application and deliveryRAL Inward colour opening system bottom-hung window· The RAL colour systems are standards of the RAL institute forcolours. Today the „RAL CLASSIC“ system is well-known: Thissystem exists since 1927 and is characterized by 210 differentscolours and a four-digit numbering system.· Sash bracket and frame bracket will be varnished or powder coatedaccording to RAL colour chart K5.· The colours RAL 9006/9007/9016 and the DB colour 703 areoffered with shorter delivery times.order Inward opening side-hung windowPlease provide the following information for an order:· Colour option: Typ: CDC-BS/C, Art.-Nr.: 25.ACV.KS· Type of bracket which should be varnished/powder coated e.g.:CDC-BS034-IFI (see planning aid for searching and finding theappropriate bracket set)· colour (four-digit RAL label) if possible including colour name· Technique (varnish or powder coating)· Quantity· Packaging (single pack or multipack)Attention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width!Product informationTypeCDC-BS/CArt. no. Set set25.ACV.KSColour Installation system typeRAL Classic K5 (more colours on request)Technique Frame material usedvarnish, powder coatingScope AD drawing of supply numbersame as standardOrder Components exampleexampleCDC, Colour 350 option housing CDC bracket CDC, 600 housingType Sash / bracket Art. no. / colour art. no. optionCDC-BS/C / 25.ACV.KSType Frame bracket / art. no.CDC-BS034-IFIColour Cover plate system /art. no.RAL 9016TechniquevarnishQuantity Scope of supply100 Complete, including fixing materialsPackaging *See the application overview for CDC bracket multipack sets on the reverse for detailed information about the profile seriesExample bracket set CDC-BS034-IFIRemains blackVarnished/powder coated components areshown in red for clarification. Screws andsplints will not be varnished/powdercoated.RAL 9006*RAL 9007*RAL 9016*© 2012 D+H Mechatronic AG, AmmersbekComponent will be varnished/powder coated in RAL xxxxDB 703*D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 13Series CDC

CDC bracket sets forOverview profile series incl. outer frame and sash frameOuter frame profilesSash profilesPage 14D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

KA bracket sets forInstallation solutions for roof windowsArguments Verwendung for D+H installation solutionsEfficiency• Time-saving installation through optimal adaptation of thebracket set for the particular profile• no additional adaptation work on the bracket necessaryEN 12101-2 tested• The bracket sets were tested in combination with an automaticSHEV according to DIN EN 12101-2 (classification reports arestill being produced in part).Functional safety• Optimum adaptation of the bracket to the particular drivesystem guarantees complete functional safetyProduct informationComplete scope of supply• All materials necessary for fixing are included in the scope ofTypsupply of the bracket setArt.-Nr. SetMontageartSpecial coloursRahmenmaterial• All brackets can be supplied in a special colour as an option,AD-Zeichnungsnummeraccording to RAL Classic (colour chart RAL-K5)(wet-painted or powder-coated)BestandteileFlügelkonsole Documentation / Art.-Nr.Rahmenkonsole • Application drawings / Art.-Nr. suitable for window and facademanufacturers availableLieferumfangSets komplett inkl. Befestigungsmaterial© 2012 D+H Mechatronic AG, AmmersbekD+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 15Series KA

KA bracket sets for®Sapa Series SFB 5050/5060ApplicationOutward opening roof windowŸBracket set specially designed forKA-SW, motor mounting bracketdesigned for especially largeforces.KA-BS015-VFOKA-TW-BS031-VFOKA-SW-BS016-VFOProduct informationTypeArt. no. setInstallation typeFrame materialAD drawing numberComponentsSash bracket / art. no.Frame bracket / art. no.KAKA-TWKA-SWKA-BS015-VFO KA-TW-BS031-VFO KA-SW-BS016-VFO26.ABR.KS 26.ACK.KS 26.ABS.KSsurfaced mounted surfaced mounted surfaced mountedaluminium window aluminium window aluminium windowAD00086 AD00114 AD00087KA-BS015-VFO KA-TW-BS031-VFO KA-SW-BS016-VFOKA-SB008 / 26.ABP.KS KA-SB008 / 2x 26.ABP.KS KA-SB008 / 2x 26.ABP.KSKA-FB009 / 26.ABD.KS KA-FB009 / 26.ABD.KS KA-FB009 / 26.ABD.KSScope of supplyComplete, including fixing materialsKA-BS015-VFO KA-TW-BS031-VFO KA-SW-BS016-VFOPage 16D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

KA bracket sets forInstallation solutions for top-hung windowsArguments Verwendung for D+H installation solutionsEfficiency• Time-saving installation through optimal adaptation of thebracket set for the particular profile• no additional adaptation work on the bracket necessaryEN 12101-2 tested• The bracket sets were tested in combination with an automaticSHEV according to DIN EN 12101-2 (classification reports arestill being produced in part).Functional safety• Optimum adaptation of the bracket to the particular drivesystem guarantees complete functional safetyProduct informationComplete scope of supply• All materials necessary for fixing are included in the scope ofTypsupply of the bracket setArt.-Nr. SetMontageartSpecial coloursRahmenmaterial• All brackets can be supplied in a special colour as an option,AD-Zeichnungsnummeraccording to RAL Classic (colour chart RAL-K5)(wet-painted or powder-coated)BestandteileFlügelkonsole Documentation / Art.-Nr.Rahmenkonsole • Application drawings / Art.-Nr. suitable for window and facademanufacturers availableLieferumfangSets komplett inkl. Befestigungsmaterial© 2012 D+H Mechatronic AG, AmmersbekD+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 17Series KA

KA bracket sets forSapa ®Series SFB 1074ApplicationTop-hung window, outwards openingKA-BS006-VFOProduct informationTypeArt. no. setInstallation typeFrame materialAD drawing numberComponentsSash bracket / art. no.Frame bracket / art. no.KAKA-BS074-VFO26.AEJ.KSsurfaced mountedaluminium windowAD00232KA-BS074-VFOKA-SB013 / 26.AEK.KSKA-FB016 / 26.AFA.KSScope of supplyComplete, including fixing materialsKA-BS074-VFOPage 18D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

KA bracket sets forColour optionKA-BS/C (26.AAV.KS)Order Verwendung and deliveryRAL color system· The RAL colour systems are standards of the RAL institute forcolours. Today the „RAL CLASSIC“ system is well-known: Thissystem exists since 1927 and is characterized by 210 differentscolours and a four-digit numbering system.· Sash bracket and frame bracket will be varnished or powder coatedaccording to RAL color chart K5.· By default the KA bracket sets are delivered as follows:– stainless steel, tumbled– aluminium, nature anodized (similar silver)– cast elements, powder coated similar RAL 9006orderPlease provide the following information for an order:· Colour option: Type: KA-BS/C, Art.-No.: 26.AAV.KS· Type of bracket which should be varnished/powder coated e.g.: KA-BS022-VFO (see planning aid for searching and finding theappropriate bracket set)· colour (four-digit RAL label) if possible including colour name· Technique (varnish or powder coating)· Quantity· Packaging (single pack or multipack)· Price for varnishing/powder coating depends on the number ofitems which have to be varnished.Product informationTypeArt.-No. Art.-Nr. SetColour Montageart systemTechnique RahmenmaterialScope AD-Zeichnungsnummerof supplyOrder Bestandteile exampleType Flügelkonsole / Art.-No. / color Art.-Nr. optionType Rahmenkonsole / Art.-Nr.Colour systemTechniqueQuantityPackaging LieferumfangColour option KA, KA-TW, KA-SW bracketKA-BS/C26.AAV.KSRAL Classic K5 (more colors on request)varnish, powder coatingsame as standardExampleKA-BS/C / 26.AAV.KSKA-BS022-VFORAL 9016varnish100Sets komplett multipack inkl. BefestigungsmaterialExample bracket set KA-BS022-VFOVarnished/powder coated components are shown inred for clarification. Screws and splints will not bevarnished/powder coated.Components will be varnished/powder coated in RAL xxxx© 2012 D+H Mechatronic AG, AmmersbekD+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 19Series KA

KA bracket sets forApplicationProduct informationTypeArt. no. setInstallation typeFrame materialAD drawing numberComponentsSash bracket / art. no.Frame bracket / art. no.Scope of supplyComplete, including fixing materialsPage 20D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

CDP bracket sets forMounting solutions for roof windowsArguments Application for D+H installation solutionsOutward opening roof window, opposite mountedEfficiency• Time-saving installation through optimal adaptationof the bracket set to the particular profile systemOutward opening roof window, side mountedHigh strength• Installation solutions designed for maximum load-bearing(up to 1,500N)DIN EN 12101-2 tested• Bracket sets and their installation solutions arein certificationQuick fitting• Brackets are ready for immediate installation - no additionalProductadaptationinformationwork on the brackets is necessaryopposite mountedTypeFunctional safetyArt. no. set• Optimum adaptation of the bracket to the particular driveDrivesystemusedguarantees complete functional safetyZA; all versions ZA; all versionsArt. no. variantCompleteAD drawingscopenumberof supply• All necessary fixing materials are included in the scope ofComponentssupply of the bracket setSash bracket / art. no.Design Frame bracket / art. no.• Basis Functional bracket design / art. no. which also satisfies high aestheticThread requirements plate / art. no.Adapter bracket / art. no.Special Scope of colours supplyComplete, including fixing materials• All brackets can be supplied in a special colour as an option,according to RAL Classic (colour chart RAL-K5)(wet-painted or powder-coated)side mountedDocumentation• Application drawings suitable for window and facademanufacturers available© 2012 D+H Mechatronic AG, AmmersbekD+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 21Series CDP

CDP bracket sets for®Sapa Series SFB 5050ApplicationOutward opening roof window, opposite mounted· To insert the rivet nuts, bothwalls of the insert sash profilemay need to be drilled.Product informationTypeArt. no. setDrive usedArt. no. variantAD drawing numberComponentsSash bracket / art. no.Frame bracket / art. no.Basis bracket / art. no.Thread plate / art. no.Adapter bracket / art. no.Scope of supplyCDP-BS005-OM26.CAN.KSCDP; all versions26.CBC.KSAD00253CDP-BS005-OMCDP-SB001 / 26.CAA.KSCDP-FB001 / 26.CAE.KS––CDP-AB001 / 26.CAB.KSComplete, including fixing materialsCDP-BS005-OMPage 22D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

CDP bracket sets forColour optionCDP-BS/C (26.CBC.KS)Order Application and deliveryOutward Option opening roof window, opposite mounted· You can order the complete bracket set as well as sash bracket,frame bracket and basis bracket as colour option.· Colour option:– The RAL color systems are standards of the RAL institute forcolours. Today the „RAL CLASSIC“ system is well-known: Thissystem exists since 1927 and is characterized by 210 differentscolours and a four-digit numbering system.– Sash bracket, frame bracket and basis bracket will be varnished orpowder coated according to RAL colour chart K5.Outward Order opening roof window, side mountedPlease provide the following information for an order:· Colour option: Type: CDP-BS/C, Art.-No.: 26.CBC.KS· Type of bracket which should be varnished/powder coated e.g.:CDP-BS004-OM (see planning aid for searching and finding theappropriate bracket set)· colour (four-digit RAL label) if possible including colour name· Technique (varnish or powder coating)· Quantity· Packaging (single pack or multipack)· Price for varnishing/powder coating depends on the number of itemswhich have to be varnished.Product informationopposite Colour option mounted CDP bracketside mountedTypeArt.-No. no. set SetColour Drive used systemCDP-BS/C26.CBC.KSRAL ZA; all Classic versions K5 (more colours on request) ZA; all versionsTechnique Art. no. variantScope AD drawing of supply numbervarnish, powder coatingsame as standardOrder Components exampleType Sash / bracket Art.-No. / colour art. no. optionType Frame bracket / art. no.Colour Basis bracket system/ art. no.Technique Thread plate / art. no.Quantity Adapter bracket / art. no.Packaging Scope of supplyExampleCDP-BS/C / 26.CBC.KSCDP-BS004-OMRAL 9016varnish100multipack Complete, including fixing materialsExample bracket set CDP-BS004-OMVarnished/powder coated components are shown inred for clarification. Screws and splints will not bevarnished/powder coated.Components will be varnished/powder coated in RAL xxxxD+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany© 2012 D+H Mechatronic AG, Ammersbek Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 23Series CDP

CDP bracket sets forPage 24D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

ZA bracket sets forMounting solutions for roof windowsArguments Application for D+H installation solutionsOutward opening roof window, opposite mountedEfficiency• Time-saving installation through optimal adaptationof the bracket set to the particular profile systemOutward opening roof window, side mountedHigh strength• Installation solutions designed for maximum load-bearing(up to 1,500N)DIN EN 12101-2 tested• Bracket sets and their installation solutions are testedand certified according to DIN EN12101-2Quick fitting• Brackets are ready for immediate installation - no additionalProductadaptationinformationwork on the brackets is necessaryopposite mountedTypeFunctional safetyArt. no. set• Optimum adaptation of the bracket to the particular driveDrivesystemusedguarantees complete functional safetyZA; all versions ZA; all versionsArt. no. variantCompleteAD drawingscopenumberof supply• All necessary fixing materials are included in the scope ofComponentssupply of the bracket setSash bracket / art. no.Design Frame bracket / art. no.• Basis Functional bracket design / art. no. which also satisfies high aestheticThread requirements plate / art. no.Adapter bracket / art. no.Special Scope of colours supplyComplete, including fixing materials• All brackets can be supplied in a special colour as an option,according to RAL Classic (colour chart RAL-K5)(wet-painted or powder-coated)side mountedDocumentation• Application drawings suitable for window and facademanufacturers available© 2012 D+H Mechatronic AG, AmmersbekD+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 25Series ZA

ZA bracket sets for®Sapa Series SFB 5050/5060ApplicationOutward opening roof window, opposite mounted· To insert the rivet nuts, both wallsof the insert sash profile mayneed to be drilled.Outward opening roof window, side mounted· To insert the rivet nuts, both wallsof the insert sash profile mayneed to be drilled.Product informationTypeArt. no. setopposite mountedside mountedZA-BS016-OMZA-BS015-SM27.BBP.KS27.BBN.KSDrive used ZA; all versions ZA; all versionsArt. no. variant27.BAV.KS27.BAV.KSAD drawing numberAD00054AD00053Sash bracket / art. no.Frame bracket / art. no.Basis bracket / art. no.Thread plate / art. no.Adapter bracket/ art. no.Scope of supplyZA-BS016-OMZA-BS015-SMZA-SB014-OM / 27.BBL.KSZA-SB013-SM / 27.BBK.KSZA-FB003-OM / 27.BAN.KSZA-FB004-SM / 27.BAS.KS– –– –68.102.73 68.102.73Complete, including fixing materialsZA-BS016-OMZA-BS015-SMPage 26D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

ZA bracket sets forColour optionZA-BS/C (27.BAV.KS)Order Application and deliveryOption Outward opening roof window, opposite mounted· You can order the complete bracket set as well as sash bracket,frame bracket and basis bracket as colour option.· Colour option:– The RAL color systems are standards of the RAL institute forcolours. Today the „RAL CLASSIC“ system is well-known: Thissystem exists since 1927 and is characterized by 210 differentscolours and a four-digit numbering system.– Sash bracket, frame bracket and basis bracket will be varnished orpowder coated according to RAL colour chart K5.Order Outward opening roof window, side mountedPlease provide the following information for an order:· Colour option: Type: ZA-BS/C, Art.-No.: 27.BAV.KS· Type of bracket which should be varnished/powder coated e.g.: ZA-BS004-OM (see planning aid for searching and finding theappropriate bracket set)· colour (four-digit RAL label) if possible including colour name· Technique (varnish or powder coating)· Quantity· Packaging (single pack or multipack)· Price for varnishing/powder coating depends on the number of itemswhich have to be varnished.Product informationColour opposite option mounted ZA bracketside mountedTypeArt.-No. no. set SetColour Drive used systemZA-BS/C27.BAV.KSRAL ZA; all Classic versions K5 (more colors on request) ZA; all versionsTechnique Art. no. variantScope AD drawing of supply numbervarnish, powder coatingsame as standardOrder Components exampleType Sash / bracket Art.-No. / colour art. no. optionType Frame bracket / art. no.Colour Basis bracket system/ art. no.Technique Thread plate / art. no.Quantity Adapter bracket / art. no.Packaging Scope of supplyExampleZA-BS/C / 27.BAV.KSZA-BS004-OMRAL 9016varnish100multipack Complete, including fixing materialsExample bracket set ZA-BS004-OMVarnished/powder coated components are shown inred for clarification. Screws and splints will not bevarnished/powder coated.Components will be varnished/powder coated in RAL xxxxD+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany© 2012 D+H Mechatronic AG, Ammersbek Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 27Series ZA

Page 28D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

SXD bracket sets forMounting solutions for roof windowsArguments Application for D+H installation solutionsOutward opening roof window, opposite mountedEfficiency• Time-saving installation through optimal adaptationof the bracket set to the particular profile systemOutward opening roof window, side mountedHigh strength• Installation solutions designed for maximum load-bearing(up to 1,500N)Quick fitting• Brackets are ready for immediate installation - no additionaladaptation work on the brackets is necessaryFunctional safety• Optimum adaptation of the bracket to the particular driveProductsystem guaranteesinformationcomplete functional safetyopposite mountedTypeComplete scope of supplyArt. no. set• All necessary fixing materials are included in the scope ofDrivesupplyusedof the bracket setSXD; all versions SXD; all versionsArt. no. variantDesignAD drawing number• Functional design which also satisfies high aestheticComponentsrequirementsSash bracket / art. no.Special Frame bracket colours / art. no.• Basis All brackets can / art. be no. supplied in a special colour as an option,Thread according plate to / RAL art. no. Classic (colour chart RAL-K5)(wet-painted or powder-coated)Adapter bracket / art. no.Documentation• Application drawings suitable for window and facademanufacturers availableside mounted© 2012 D+H Mechatronic AG, AmmersbekD+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 29Series SXD

SXD bracket sets for®Sapa Series SFB 5050/5060ApplicationOutward opening roof window, opposite mounted· To insert the rivet nuts, bothwalls of the sash frame profilemay need to be drilled.Outward opening roof window, side mounted· To insert the rivet nuts, bothwalls of the sash frame profilemay need to be drilled.Product informationTypeArt. no. setopposite mountedside mountedSXD-BS021-OMSXD-BS020-SM27.CBG.KS27.CBF.KSDrive used SXD; all versions SXD; all versionsArt. no. variant27.CAV.KS27.CAV.KSAD drawing numberAD00180AD00179ComponentsSash bracket / art. no.Frame bracket / art. no.Basis bracket / art. no.Thread plate / art. no.Adapter bracket/ art. no.Scope of supplySXD-BS021-OMSXD-BS020-SMZA-SB014-OM / 27.BBL.KSZA-SB013-SM / 27.BBK.KSSXD-FB002 / 27.CAB.KSSXD-FB003 / 27.CAC.KS– –– –68.102.73 68.102.73Complete, including fixing materialsSXD-BS021-OMSXD-BS020-SMPage 30D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

SXD bracket sets forColour optionSXD-BS/C (27.CAV.KS)Order Application and deliveryOutward Option opening roof window, opposite mounted· You can order the complete bracket set as well as sash bracket,frame bracket and basis bracket as colour option.· Colour option:– The RAL color systems are standards of the RAL institute forcolours. Today the „RAL CLASSIC“ system is well-known: Thissystem exists since 1927 and is characterized by 210 differentscolours and a four-digit numbering system.– Sash bracket, frame bracket and basis bracket will be varnished orpowder coated according to RAL colour chart K5.Outward Order opening roof window, side mountedPlease provide the following information for an order:· Colour option: Type: SXD-BS/C, Art.-No.: 27.CAV.KS· Type of bracket which should be varnished/powder coated e.g.:SXD-BS019-OM (see planning aid for searching and finding theappropriate bracket set)· colour (four-digit RAL label) if possible including colour name· Technique (varnish or powder coating)· Quantity· Packaging (single pack or multipack)· Price for varnishing/powder coating depends on the number of itemswhich have to be varnished.Product informationopposite Colour option mounted SXD bracketside mountedTypeArt.-No. no. set SetColour Drive used systemSXD-BS/C27.CAV.KSRAL SXD; Classic all versions K5 (more colors on request) SXD; all versionsTechnique Art. no. variantScope AD drawing of supply numbervarnish, powder coatingsame as standardComponentsOrder exampleType Sash / bracket Art.-No. / colour art. no. optionType Frame bracket / art. no.Colour Basis bracket system/ art. no.Technique Thread plate / art. no.Quantity Adapter bracket / art. no.PackagingExampleSXD-BS/C / 27.CAV.KSSXD-BS019-OMRAL 9016varnish100multipackExample bracket set SXD-BS019-OMVarnished/powder coated components are shown inred for clarification. Screws and splints will not bevarnished/powder coated.© 2012 D+H Mechatronic AG, AmmersbekComponents will be varnished/powder coated in RAL xxxxD+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 31Series SXD

Page 32D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

DXD bracket sets forMounting solutions for roof windowsArguments Application for D+H installation solutionsOutward opening roof window, opposite mountedEfficiency• Time-saving installation through optimal adaptation of thebracket set to the particular profile systemHigh strength• Installation solutions designed for maximum load-bearing (up to3000N)Outward opening roof window, side mountedEN 12101-2 tested• Bracket sets and their fitting solutions are tested and certifiedaccording to EN12101-2Quick fitting• Brackets are ready for immediate installation - no additionaladaptation work on the brackets is necessaryProduct informationopposite mountedside mountedFunctional safetyType• Optimum adaptation of the bracket to the particular driveArt.systemno. setguarantees complete functional safetyDrive used DXD; all versions DXD; all versionsCompleteArt. no. variantscope of supply27.AAV.KS 27.AAV.KS•ADAlldrawingnecessarynumberfixing materials are included in the scope ofsupply of the bracket setComponentsDesign Sash bracket / art. no.• Frame Functional bracket design / art. which no. also satisfies high aestheticBasis requirements bracket /art. no.Thread plate / art. no.Special Support colours spindle / art. no.• Scope All brackets of supply can be supplied in a special colour Complete, as an option, including fixing materialsaccording to RAL Classic (colour chart RAL-K5)(wet-painted or powder-coated)Documentation• Application drawings suitable for window and facademanufacturers available© 2012 D+H Mechatronic AG, AmmersbekD+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 33Series DXD

DXD bracket sets for®Sapa Series SFB 5050/5060ApplicationOutward opening roof window, opposite mounted· The thread plate (see red circle)of the frame bracket must first beinserted into the space of theprofile and appropriately fixedbefore assembly of the sashframe parts. For more detailledinformation on assembly, pleaserefer to the D+H applicationdrawings.Outward opening roof window, side mounted· The thread plate (see red circle)of the frame bracket must first beinserted into the space of theprofile and appropriately fixedbefore assembly of the sashframe parts. For more detailledinformation on assembly, pleaserefer to the D+H applicationdrawings.Product informationTypeArt. no. setopposite mountedside mountedDXD-BS019-OMDXD-BS020-SM27.ACD.KS27.ACE.KSDrive used DXD; all versions DXD; all versionsArt. no. variant 27.AAV.KS 27.AAV.KSAD drawing numberAD00034AD00033ComponentsSash bracket / art. no.Frame bracket / art. no.Basis bracket /art. no.Thread plate / art. no.Support spindle / art. no.Scope of supplyDXD-BS019-OMDXD-BS020-SMDXD-SB031-SASFB-OM / 27.ABN.KS DXD-SB029-SASFB-SM / 27.ABL.KSDXD-FB005-OM / 27.ABX.KSDXD-FB004-SM / 27.ABW.KS– –6x12x150mm / 65.401.93 6x12x150mm / 65.401.9362mm / 27.AZV.KS62mm / 27.AZV.KSComplete, including fixing materialsDXD-BS019-OMDXD-BS020-SMDamit die Abstützung der Rahmenkonsole am Riegel angewendet werden kann, muss die bauseitige Riegelkonstruktion eine Mindesttiefe von60mm aufweisen. Ohne Abstützung ist nur eine Lasteinleitung von ca. 1500N möglich.Page 34D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

DXD bracket sets forColour optionDXD-BS/C (27.AAV.KS)Order Application and deliveryOutward Option opening roof window, opposite mounted· You can order the complete bracket set as well as sash bracket,frame bracket and basis bracket as colour option.· Colour option:– The RAL color systems are standards of the RAL institute forcolours. Today the „RAL CLASSIC“ system is well-known: Thissystem exists since 1927 and is characterized by 210 differentscolours and a four-digit numbering system.– Sash bracket, frame bracket and basis bracket will be varnished orpowder coated according to RAL colour chart K5.Outward Order opening roof window, side mountedPlease provide the following information for an order:· Colour option: Type: DXD-BS/C, Art.-No.: 27.AAV.KS· Type of bracket which should be varnished/powder coated e.g.:DXD-BS012-OM (see planning aid for searching and finding theappropriate bracket set)· colour (four-digit RAL label) if possible including colour name· Technique (varnish or powder coating)· Quantity· Packaging (single pack or multipack)· Price for varnishing/powder coating depends on the number of itemswhich have to be varnished.Product informationopposite Colour option mounted DXD bracketside mountedTypeArt.-No. no. set SetColour Drive used systemDXD-BS/C27.AAV.KSDXD; RAL Classic all versions K5 (more colors on request) DXD; all versionsTechnique Art. no. variant 27.AAV.KS varnish, powder coating27.AAV.KSScope AD drawing of supply numbersame as standardOrder Components exampleSash Type / bracket Art.-No. / art. colour no. optionFrame Type bracket / art. no.Basis Colour bracket system/art. no.Thread Technique plate / art. no.Support Quantityspindle / art. no.Scope Packaging of supplyExampleDXD-BS/C / 27.AAV.KSDXD-BS012-SMRAL 9016varnish100multipack Complete, including fixing materialsExample bracket set DXD-BS012-OMVarnished/powder coated components are shown inred for clarification. Screws and splints will not bevarnished/powder coated.Components will be varnished/powder coated in RAL xxxx© 2012 D+H Mechatronic AG, AmmersbekD+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.comPage 35Series DXD

DXD bracket sets forApplicationOutward opening roof window, opposite mountedOutward opening roof window, side mountedProduct informationTypeArt. no. setDrive used DXD; all versions DXD; all versionsArt. no. variant 27.AAV.KS 27.AAV.KSAD drawing numberComponentsopposite mountedside mountedSash bracket / art. no.Frame bracket / art. no.Basis bracket /art. no.Thread plate / art. no.Support spindle / art. no.Scope of supplyComplete, including fixing materialsPage 36D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · GermanyPhone: +49 40 60565-0 · Fax: +49 40 60565-222 · info@dh-partner.com · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek

WWW.DH-PARTNER.COM© 2012 D+H Mechatronic AG, Ammersbek_99.760.53, 1.0/07/12D+H Mechatronic AGGeorg-Sasse-Straße 28-32D-22949 AmmersbekGermanyTel: +49 40 60565 0Fax: +49 40 60565 222E-Mail: info@dh-partner.com