1967-1969 Camaro Rear Torque Arm Install Sheet - Total Cost ...

The Torque Arm is shipped with the slider assemblyseparate to facilitate packaging. The slider has preassembledwith Teflon bushings and has beeninstalled in the Torque Arm to check for proper fit.We use anti-seize on the threads to prevent galling.When painting or powder coating the assembly, tapethe threads on the slider and plug the hole in theTorque Arm tube.Install the slider into the Torque Arm using antiseizeand be careful not to cross thread and tighten. Iused a vise and a 12 inch crescent wrench to makesure it was tight.Install the rear of the Torque Arm to the tabs on thebottom of the rear end housing using a ½ inch by 3½inch bolt, washers and nut. Lightly tighten.