Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

Super Aggregated VLANs 4show vlanSyntax: show vlanThis command displays information about configured VLANs, as shown in the following example.Brocade# show vlanConfigured PORT-VLAN entries: 3Maximum PORT-VLAN entries: 4090Default PORT-VLAN id: 1PORT-VLAN 1, Name DEFAULT-VLAN, Priority Level0L2 protocols: NONEUntagged Ports: ethernet 2/1 to 2/20 ethernet 3/1 to 3/20 ethernetPORT-VLAN 2, Name [None], Priority Level0L2 protocols: NONEip-protocol VLAN, Dynamic port disabledName: basicPORT-VLAN 1001, Name [None], Priority Level0L2 protocols: MRPTagged Ports: ethernet 3/1 ethernet 3/12 to 3/13 ethernet 3/20Bytes received: 6000show vlan ethernetSyntax: show vlan ethernet This command, with a entry, displays VLAN information for the specified port, as shownin the following example.Brocade# show vlan ethernet 4/1Port 4/1 is a member of 2 VLANsVLANs 1 100show vlan detailSyntax: show vlan detail []The variable displays information about a specific VLAN.This command displays detailed information about VLAN states, port types, and port modes, aswell as control protocols configured on the VLAN, as shown in the following example.Brocade# show vlan detailUntagged Ports: ethernet 2/1 to 2/20 ethernet 4/4Tagged Ports: NoneDual-mode Ports: ethernet 3/1 to 3/20jjj ethernet 4/1 to 4/3Default VLAN: 1Control VLAN: 4095VLAN Tag-type: 0x8100AVP Count : 24EVP Count : 28PORT-VLAN 1, Name DEFAULT-VLAN, Priority Level0----------------------------------------------------------Port Type Tag-Mode Protocol State2/1 PHYSICAL UNTAGGED NON DISABLED2/2 PHYSICAL UNTAGGED NONE DISABLED2/3 PHYSICAL UNTAGGED NONE DISABLED2/4 PHYSICAL UNTAGGED NONE DISABLED2/5 PHYSICAL UNTAGGED NONE DISABLED.. (output edited for brevity)Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide 8153-1002426-02