Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

NETCONF 12NETCONF: parser debugging is onDec 22 19:33:58 NETCONF: netconf_error_reset() cdb session 11Dec 22 19:34:41 Object = rpc, Context = 0x2426f15c and Cookie = 0x24271e96Dec 22 19:34:41 Object = get-config, Context = 0x24271e96 and Cookie = 0x24271e96Dec 22 19:34:41 Object = rpc, Context = 0x2426f15c and Cookie = 0x24271e96Dec 22 19:34:41 Object = get-config, Context = 0x24271e96 and Cookie = 0x24274bd0Dec 22 19:34:41 Object = filter, Context = 0x24274bd0 and Cookie = 0x24274bd0Dec 22 19:34:41 NETCONF[0]: FILTER(filter): 24271e96Dec 22 19:34:41 Object = rpc, Context = 0x2426f15c and Cookie = 0x24271e96Dec 22 19:34:41 Object = get-config, Context = 0x24271e96 and Cookie = 0x24274bd0Dec 22 19:34:41 Object = filter, Context = 0x24274bd0 and Cookie = 0x2427790aDec 22 19:34:41 Object = netiron-config, Context = 0x2427790a and Cookie =0x2427790aDec 22 19:34:41 Object = rpc, Context = 0x2426f15c and Cookie = 0x24271e96Dec 22 19:34:41 Object = get-config, Context = 0x24271e96 and Cookie = 0x24274bd0Dec 22 19:34:41 Object = filter, Context = 0x24274bd0 and Cookie = 0x2427790aDec 22 19:34:41 Object = netiron-config, Context = 0x2427790a and Cookie =0x2427a644Dec 22 19:34:41 Object = vlan-config, Context = 0x2427a644 and Cookie = 0x2427a644Dec 22 19:34:41 14 contexts available after releasing context for vlan-configDec 22 19:34:41 15 contexts available after releasing context for netiron-configDec 22 19:34:41 (filterDec 22 19:34:41 (netiron-configDec 22 19:34:41(vlan-configDec 22 19:34:41 )Dec 22 19:34:41 )Dec 22 19:34:41 )Dec 22 19:34:41Dec 22 19:34:41 16 contexts available after releasing context for filterDec 22 19:34:41 17 contexts available after releasing context for get-configDec 22 19:34:41 NETCONF: netconf_error_reset() cdb session 11debug ip netconf rpcSyntax: [no] debug ip netconf rpcThis command displays debug messages related to the NETCONF Remote Procedure Call (RPC)layer. NETCONF uses RPC-based mechanisms to ease the communication between the NETCONFclient and NETCONF server.Command output resembles the following example.Brocade# debug ip netconf rpcNETCONF: rpc debugging is onDec 22 19:57:26 NETCONF [0]: Rpc request length (16845 ) is too-big : 16768Dec 22 19:57:26 NETCONF [0]: Rpc request length (16926 ) is too-big : 16768Dec 22 19:57:26 NETCONF [0]: Rpc request length (16944 ) is too-big : 16768Dec 22 19:57:26 NETCONF [0]: Rpc request length (16959 ) is too-big : 16768Dec 22 19:57:26 NETCONF [0]: Rpc request length (16979 ) is too-big : 16768Dec 22 19:57:26 NETCONF [0]: Rpc request length (16995 ) is too-big : 16768Dec 22 19:57:26 NETCONF [0]: Rpc request length (17012 ) is too-big : 16768Dec 22 19:57:26 NETCONF [0]: Rpc request length (17022 ) is too-big : 16768Dec 22 19:57:26 NETCONF [0]: Rpc request length (17029 ) is too-big : 16768debug ip netconf transportSyntax: [no] debug ip netconf transportThis command displays debug messages related to the NETCONF transport layer.The following example output is generated when the NETCONF server is enabled or disabled, andNETCONF transport layer debugging is enabled.Brocade# debug ip netconf transportNETCONF: transport debugging is onBrocade# config tBrocade(config)# netconf serverBrocade MLX Series and Brocade NetIron XMR Diagnostic Guide 36753-1002426-02