Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

10LP CPU packet statisticsPacket drop causes:[PP – Post Processing Drops; CV – Configuration Violation Drops;PE - Packet Error Drops; PFE - Potential Forwarding Error Drops;OD - Other Drops]3-L2 packet forwarded in hardware(PP):10020-L2 port state is blocking(CV):100ARP packets captured for DAI:0ARP packets failed DAI:0packets processed by port:port 4/1:1000port 4/2:0port 4/3:0port 4/4:0LP CPU packet statistics clear commandNOTELP CPU packet statistics can only be cleared using the clear lp-cpu packet statistics command.clear lp-cpu packet statisticsSyntax: clear lp-cpu packet statistics This command clears all packet statistics processed on a specific LP, or for all LPs. This commandis used on both the MP and the LP. On the MP module, the clear lp-cpu packet statistics commandclears all packet statistics for a specific slot, or clears packet statistics on all LPs. On the LPmodule, the clear lp-cpu packet statistics command clears packet statistics on all ports of the LP.The variable specifies the slot number for which you want to clear packet statistics.To clear all LP CPU packet statistics processed on all LPs, enter the following command.Brocade# clear lp-cpu packet statisticsTo clear all LP CPU packet statistics processed on slot 1 on the MP, enter the following command.Brocade# clear lp-cpu packet statistics 1362 Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide53-1002426-02