Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

Managing memory and CPU usage 2Total buf used by appl = 5632mac_mgr (0x3 ) owns 3 buffersip_tx (0xb ) owns 2 buffersrtm (0xc ) owns 4 buffersmcast (0x11 ) owns 11 buffersconsole (0x15 ) owns 1 buffersip_rx (0x1e ) owns 7 buffersrtm6 (0x22 ) owns 2 buffersmcast6 (0x25 ) owns 5 buffersmpls (0x29 ) owns 1 buffersnht (0x2a ) owns 2 buffersntp (0x37 ) owns 5593 buffersisis_spf (0x5d ) owns 1 buffersBM Free App Id Invalid = 4974 BM Free App Id Not Owner = 15374BM Get App Ref Error = 4974 BM Inc App Ref Error = 0BM Transfer App Ref Error = 1102An overview of system activity can be helpful in troubleshooting issues. Too many IN-USE buffersmust be justified or there may be memory leaks. BAD-SIG readings may indicate memorycorruptions. BAD-REF readings may indicate improper freeing when buffers are shared.show bm appidSyntax: show bm appid The parameter specifies the appication ID.This command displays buffer usage information for the specified application ID. Command outputresembles the following example.Brocade# show bm appid 6Pool id = 0 Application Buffer Usage:Total buf used by appl = 1vsrp (0x6 ) owns 0 buffersPool id = 1 Application Buffer Usage:Total buf used by appl = 0vsrp (0x6 ) owns 0 buffersPool id = 2 Application Buffer Usage:Total buf used by appl = 0vsrp (0x6 ) owns 0 buffersPool id = 3 Application Buffer Usage:Total buf used by appl = 39vsrp (0x6 ) owns 0 buffersshow bm-dump-modeSyntax: show bm-dump-modeUse the show bm-dump-mode command to pinpoint offending code that may be responsible fordouble fees and memory leaks. Command output resembles the following example.Brocade# show bm-dump-modeBuffer dump mode is enabledNOTEA track state of 0 means that the buffer was allocated before the show bm-dump-mode commandwas executed.Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide 2153-1002426-02