Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

10MCTNov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - matching cluster rbridge idfoundNov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive -Received CCP Keepalivepacket to be sent on VE interface - using source mac address 001bed3b 0000a200Nov 23 08:42:42 CLUSTER CCP PACKET: Tx L2VPN CCP Keepalive IP 5.5.5.5, vlan 31,port 1/3Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - cluster id 00000001cluster_rbridge_id 00000005 magic_no 000014efNov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - matching cluster rbridge idfoundNov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive -Received CCP Keepalivedebug cluster fsmSyntax: [no] debug cluster fsmThis command displays FSM information for the cluster.Command output resembles the following example.Brocade# debug cluster fsmNov 23 08:40:27 CLUSTER CONFIG: CLUSTER_CONFIG_CLUSTER_DEPLOY ITC messagereceivedNov 23 08:40:27 CLUSTER CONFIG: sending EVENT_ID_CLUSTER_DEPLOY event cluster 1Nov 23 08:40:27 CLUSTER CONFIG: sending EVENT_ID_CLUSTER_CLIENT_DEPLOY eventcluster 1, client port 3Nov 23 08:40:27 CLUSTER CONFIG: sending EVENT_ID_CLUSTER_CLIENT_DEPLOY eventcluster 1, client port 1Nov 23 08:40:29 CLUSTER FSM: cluster id 1, peer rbridge id 5, old state: Init,event: CCP UpNov 23 08:40:29 CLUSTER FSM: CCRR message sent for client for multiple clientsNov 23 08:40:29 CLUSTER FSM: new state: LoadingNov 23 08:40:29 CLUSTER FSM: Received CCRR message from peer when CCP is upNov 23 08:40:29 CLUSTER FSM: cluster id 1, client id 101, old state: Init, event:CCP UpNov 23 08:40:29 CLUSTER FSM: sending EVENT_ID_MCT_REMOTE_DEPLOY eventNov 23 08:40:29 CLUSTER FSM: new state: Admin Up, master: TRUENov 23 08:40:29 CLUSTER FSM: cluster id 1, client id 102, old state: Init, event:CCP UpNov 23 08:40:29 CLUSTER FSM: sending EVENT_ID_MCT_REMOTE_DEPLOY eventNov 23 08:40:29 CLUSTER FSM: new state: Admin Up, master: TRUENov 23 08:40:29 CLUSTER FSM: cluster id 1, client id 102, old state: Admin Up,event: Remote UpNov 23 08:40:29 CLUSTER FSM: sending EVENT_ID_MCT_REMOTE_CCEP_UP eventNov 23 08:40:29 CLUSTER FSM: CCRR message sent for client 102 (return code : 0,value = 00660018)Nov 23 08:40:29 CLUSTER FSM: new state: Remote Up, master: FALSENov 23 08:40:29 CLUSTER FSM: Received Loading-Done message from peerNov 23 08:40:29 CLUSTER FSM: cluster id 1, peer rbridge id 5, old state: Loading,event: Loading DoneNov 23 08:40:29 CLUSTER FSM: sending EVENT_ID_MCT_CCP_UP eventNov 23 08:40:29 CLUSTER FSM: new state: CCP UpNov 23 08:40:29 CLUSTER FSM: cluster id 1, client id 102, old state: Remote Up,event: Spoke DownNov 23 08:40:29 CLUSTER FSM: Sending client fsm state to LP, state 1Nov 23 08:40:29 CLUSTER FSM: CCRR message sent for client 102 (return code : 0,value = 00660018)Nov 23 08:40:29 CLUSTER FSM: new state: Remote Up, master: FALSENov 23 08:40:29 CLUSTER L2VPN:Spoke PW event - Master/Slave selection for clientrbridge 102 Successful (event = 2)342 Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide53-1002426-02