Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

MCT 10Nov 23 08:39:03 CLUSTER CONFIG: LACP port id for ccep 1/4 is 2051Brocade(config-cluster-c-client-c1)# deployNov 23 08:39:03 CLUSTER CONFIG:CLUSTER_CONFIG_CLIENT_DEPLOYCLUSTER_CONFIG_ADD_CLUSTER_L2VPN_PEER ITC messagereceivedNov 23 08:39:03 CLUSTER CONFIG: sending EVENT_ID_CLUSTER_CLIENT_DEPLOY eventcluster 1, client port 3Brocade(config-cluster-c-client-c1)# client c2Nov 23 08:39:03 CLUSTER CONFIG: CLUSTER_CONFIG_ADD_CLUSTER_CLIENT ITC messagereceivedBrocade(config-cluster-c-client-c2)# rbridge-id 102Nov 23 08:39:03 CLUSTER CONFIG: CLUSTER_CONFIG_CLIENT_RBRIDGE_ID ITC messagereceivedBrocade(config-cluster-c-client-c2)# client-interface ethernet 1/2Nov 23 08:39:03 CLUSTER CONFIG: CLUSTER_CONFIG_ADD_CLIENT_PORTS ITC messagereceivedNov 23 08:39:03 CLUSTER CONFIG: LACP port id for ccep 1/2 is 2049debug cluster ccp fsmSyntax: [no] debug cluster ccp fsmThis command displays information related to Finite State Machine (FSM) transactions.Command output resembles the following example.Brocade# debug cluster ccp fsmOct 19 14:36:27 CCP: Fsm2 entry 5.5.5.5Oct 19 14:36:27 CLUSTER CCP: sent an init msg to = 5.5.5.5Oct 19 14:36:27 CLUSTER CCP: Fsm4 sending keepalive to 5.5.5.5 in state recvOct 19 14:36:27 CLUSTER CCP: Fsm6 5.5.5.5 going operationaldebug cluster ccp packetSyntax: [no] debug cluster ccp packetThis command displays information specific to L2VPN timer packet exchange operation.Command output resembles the following example.Brocade# debug cluster ccp packetNov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - cluster id 00000001cluster_rbridge_id 00000005 magic_no 000014efNov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - matching cluster rbridge idfoundNov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive -Received CCP Keepalivepacket to be sent on VE interface - using source mac address 001bed3b 0000a200Nov 23 08:42:42 CLUSTER CCP PACKET: Tx L2VPN CCP Keepalive IP 5.5.5.5, vlan 31,port 1/3Nov 23 08:42:42 Couldn't get the Area ID for patherr from 13.13.13.5Nov 23 08:42:42 Couldn't get the Area ID for patherr from 13.13.13.5Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - cluster id 00000001cluster_rbridge_id 00000005 magic_no 000014efNov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - matching cluster rbridge idfoundNov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive -Received CCP Keepalivepacket to be sent on VE interface - using source mac address 001bed3b 0000a200Nov 23 08:42:42 CLUSTER CCP PACKET: Tx L2VPN CCP Keepalive IP 5.5.5.5, vlan 31,port 1/3Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - cluster id 00000001cluster_rbridge_id 00000005 magic_no 000014efBrocade MLX Series and Brocade NetIron XMR Diagnostic Guide 34153-1002426-02