Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

10Multicast VRFBrocade# show ip pim vrf med pruneIndex Port PhyPort SourceNet Group Nbr Agesec1 v12 1/1 130.47.2.10 228.172.0.77 0.0.0.0 402 v12 1/1 130.47.2.10 228.172.0.73 0.0.0.0 403 v12 1/1 130.47.2.10 228.172.0.69 0.0.0.0 404 v12 1/1 130.47.2.10 228.172.0.65 0.0.0.0 405 v12 1/1 130.47.2.10 228.172.0.61 0.0.0.0 406 v12 1/1 130.47.2.10 228.172.0.57 0.0.0.0 407 v12 1/1 130.47.2.10 228.172.0.53 0.0.0.0 408 v12 1/1 130.47.2.10 228.172.0.49 0.0.0.0 409 v12 1/1 130.47.2.10 228.172.0.45 0.0.0.0 40--------------------------------------Total Prune entries: 9show ip pim groupSyntax: show ip pim vrf ] groupThis command displays PIM group information for an entire PIM group, or for the VRF instanceidentified by the vrf option. Command output resembles the following example.Brocade# show ip pim groupTotal number of Groups: 2Index 1 Group 239.255.162.1 Ports e3/11Multicast VRF debug commandsThis section describes the multicast VRF-related debug commands.debug ip vrfSyntax: [no] debug ip vrfThis command generates information about synchronization of VRF routing information to linecards, as shown in the following example.Brocade# debug ip vrfRTM (vrf): Processing tree download for vrf 1This is a download request from the line card to start the tree download for VRF 1.debug ip bgp all-vrfsSyntax: [no] debug ip bgp all-vrfs [ | dampening | events | graceful-restart | keepalives| updates]• - Displays information about a BGP neighbor address.• dampening - Displays information about BGP dampening.• events - Displays information about BGP events.• graceful-restart - Displays information about graceful restart events.• keepalives - Displays information about BGP keepalives.• updates - Displays information about BGP updates.This command displays information about BGP activity, with output that is limited to VRF events.334 Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide53-1002426-02