12.07.2015 Views

Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

NTP 9Syntax: [no] clock summer-timeSyntax: [no] clock timezone us The variable specifies the timezone <strong>and</strong> can be any one of the following: alaska,aleutian, arizona, central, east-indiana, eastern, hawaii, michigan, mountain, pacific, samoa.2. Exit the configuration mode by entering the following comm<strong>and</strong>.<strong>Brocade</strong>(config)# exitSyntax: exit3. Set the clock using the current Coordinated Universal Time (UTC) time, by entering thefollowing comm<strong>and</strong>.<strong>Brocade</strong># clock set 17:40:00 04-11-12Syntax: [no] clock set The variables specify the time to be set in timestamp format.4. Wait for NTP to synchronize <strong>and</strong> then the syslog messages such as the following are dispalyed.SYSLOG: Apr 11 17:41:09 <strong>Brocade</strong> NTP: System clock is synchronized to10.20.99.174. SYSLOG: Apr 11 17:41:09 <strong>Brocade</strong> NTP: Stratum is changed to4.5. Reconfigure the clock time zone <strong>and</strong> clock summer time configurations that are removed instep 1.<strong>Brocade</strong># config terminal<strong>Brocade</strong>(config)# clock timezone us pacific<strong>Brocade</strong>(config)# show clock09:41:27.182 Pacific Wed Apr 11 2012<strong>Brocade</strong>(config)# clock summer-time<strong>Brocade</strong>(config)# show clock10:41:35.632 Pacific Wed Apr 11 2012show ntp associationsSyntax: show ntp associationsThis comm<strong>and</strong> displays information about NTP servers <strong>and</strong> peers associations, as shown in thefollowing example.<strong>Brocade</strong># show ntp associationsaddress ref clock st when poll reach delay offset disp*~172.19.69.1 172.24.114.33 3 25 64 3 2.89 0.234 39377~2001:235::234INIT 16 - 64 0 0.00 0.000 15937* synced, # selected, + c<strong>and</strong>idate, - outlayer, x falseticker, ~ configuredshow ntp associations detailSyntax: show ntp associations detailThis comm<strong>and</strong> displays detailed association information of all the NTP servers <strong>and</strong> peers, asshown in the following example.<strong>Brocade</strong># show ntp association detail131.216.1.101 configured server, sys peer, stratum 2ref ID 204.123.2.5, time d21da706.1ed27000 (16:14:22.517107712 GMT+05:30 Fri Sep 16 2011)our mode client, peer mode server, our poll intvl 6, peer poll intvl 6,<strong>Brocade</strong> <strong>MLX</strong> <strong>Series</strong> <strong>and</strong> <strong>Brocade</strong> <strong>NetIron</strong> <strong>XMR</strong> <strong>Diagnostic</strong> <strong>Guide</strong> 32353-1002426-02

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!