Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

9TACACS and TACACAS+Brocade# show aaaTacacs+ key: foundryTacacs+ retries: 1Tacacs+ timeout: 15 secondsTacacs+ dead-time: 3 minutesTacacs+ Server: 207.95.6.90 Port:49:opens=6 closes=3 timeouts=3 errors=0packets in=4 packets out=4no connectionRadius key: networksRadius retries: 3Radius timeout: 3 secondsRadius dead-time: 3 minutesRadius Server: 207.95.6.90 Auth Port=1645 Acct Port=1646:opens=2 closes=1 timeouts=1 errors=0packets in=1 packets out=4no connectionshow webSyntax: show webThe show web command displays the privilege level of Web management interface users.Brocade# show webUser Privilege IP addressset 0 192.168.1.234TACACS debug commandsThis section describes the debug command used for monitoring the TACACS servers.debug ip aaaSyntax: [no] debug ip aaa [event | ipc | itc | packet]• event - Displays information about ARP events.• ipc - Displays information about ARP IPC messages.• itc - Displays information about ARP ITC messages.• packet - Displays information about ARP packets.This command displays information about AAA or TACACS+ authentication, as the followingexample illustrates.Brocade# debug ip aaaCOMMAND ACCOUNTING STARTS...RADIUS accounting for context 2Reseting RADIUS Client structureRADIUS: Reset client 0, Total number of active clients=1AAA: Open RADIUS UDP portTracing the outgoing Radius Accounting packet..UDP packet source IP=172.20.1.2, port=1061, destination IP=172.20.1.1, port=1813**Radius timer - 0 kicks in.RADIUS retransmission for user lab, context=2, client=0Tracing the outgoing Radius Accounting packet..UDP packet source IP=172.20.1.2, port=1061, destination IP=172.20.1.1, port=1813318 Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide53-1002426-02