Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

MSDP 8Brocade# debug ip msdp eventsMSDP: events debugging is onMSDP: 192.1.1.2: Process START event, local = 192.1.1.2MSDP: 192.1.1.2: TCP Connection to Remote Peer is OpenMSDP: 192.1.1.2: MSDP-TCP Connection openedMSDP: 192.1.1.2: TCP_OPEN DONE, State 4MSDP: 192.1.1.2: Originating SAMSDP: 192.1.1.2: TX Keep Alive timer expired, send keep alive to peerMSDP: 192.1.1.2: Originating SAMSDP: 192.1.1.2: TX Keep Alive timer expired, send keep alive to peerdebug ip msdp messageSyntax: [no] debug ip msdp messageThis command generates information (including message contents) about MSDP messagesreceived, transmitted, and forwarded, and flag errors in MSDP messages. Command outputresembles the following example.Brocade# debug ip msdp messageMSDP: 192.1.1.2: Xmt SARP 1.1.1.1, SA count 10(172.1.2.10,226.1.1.1) (172.1.2.10,226.1.1.2)(172.1.2.10,226.1.1.3) (172.1.2.10,226.1.1.4)(172.1.2.10,226.1.1.5) (172.1.2.10,226.1.1.6)(172.1.2.10,226.1.1.7) (172.1.2.10,226.1.1.8)MSDP: 192.1.1.2: State=4, Rcv SARP 2.2.2.2, SA count 10(192.2.2.10,225.1.1.1) (192.2.2.10,225.1.1.2)(192.2.2.10,225.1.1.3) (192.2.2.10,225.1.1.4)(192.2.2.10,225.1.1.5) (192.2.2.10,225.1.1.6)(192.2.2.10,225.1.1.7) (192.2.2.10,225.1.1.8)MSDP: 192.1.1.2: State=4, Rcv KAClearing MSDP informationYou can clear the following MSDP information:• Peer information• Source Active cache entries• MSDP statisticsTo clear MSDP peer information, enter the clear ip msdp peer command at the Privileged EXEClevel of the CLI.clear ip msdp peerSyntax: clear ip msdp peer This command displays a message to indicate when the connection has been successfully closed.To clear all the peers, omit the variable from the command.To clear the Source Active cache, enter the clear ip msdp sa-cache command at the PrivilegedEXEC level of the CLI.Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide 28753-1002426-02