Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

8MSDPBrocade# show ip msdp debug[BEGIN] MSDP Debug InfoOper is OnMax # of peers 1, # of peers 1Srvr IP 0.0.0.0, sockInit YesOrig-id 0/1/0/0.0.0.0, SA filter-orig No, orig-rmap ""/00000000entry-per-ticks 3200, adv-int 60, adv-entry-per-tick 35, state-ticks 533, startoffset10SA agetime 6, Holddown 75, KA 60, hold-timer 90, conn-rety 30SA Cache memory Pool Information:pool: 25da9600, unit_size: 24, initial_number:256, upper_limit:32000total_number:256, allocated_number:10, alloc_failure 0flag: 0, pool_index:1, avail_data:25ef60f0[END] MSDP Debug InfoMSDP debug commandsThis section describes the debug commands that generate MSDP information.debug ip msdpSyntax: [no] debug ip msdp [alarms | events | message]• alarms - Displays information about MSDP alarms.• events - Displays information about MSDP events.• message - Displays information about MSDP messages.The debug ip msdp command generates information about Multicast Source Discovery Protocol(MSDP) alarms, events, and messages.debug ip msdp alarmsSyntax: [no] debug ip msdp alarmsThis command generates information about MSDP RX processing errors, such as invalid headers orincomplete or truncated information, errors during transmission of SA advertisement transmission,(for example, buffer unavailability), and peer connection socket errors and notification messages.Command output resembles the following example.Brocade# debug ip msdp alarmsMSDP: alarms debugging is onMSDP: S=xxxxxxx P=0 Initiate Transport Connection to MSDP peerdebug ip msdp eventsSyntax: [no] debug ip msdp eventsThis command tracks originating SA advertisements, major peer events, and peer keepalive timerevents. Command output resembles the following example.286 Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide53-1002426-02