Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

QoS 7show tm port-mappingSyntax: show tm port-mappingThis command displays information about the Traffic Manager (TM) port to queue mapping, asshown in the following example.Brocade# show tm port-mappingMaximum total TM ports: 1008Currently used TM ports: 16Currently available TM ports: 992show np statisticsSyntax: show np statisticsThis command displays the Network Processor (NP) statistics for all the interface modules within adevice.NOTEThe display has been shortened for brevity.Brocade# show np statisticsPort 1/1 RXNP Rx Raw Good Packet = (667856409355)NP Rx Forward Packet = (667823373386)NP Rx Discard Packet = (33035969)NP Rx Misc Packet = (0)NP Rx Unicast Packet = (0)NP Rx Broadcast Packet = (2)NP Rx Multicast Packet = (667856409353)NP Rx Send to TM Packet = (667823373386)NP Rx Bad Packet = (0)NP Rx Lookup Unavailable = (0)NP Rx ACL Drop = (0)NP Rx Priority 0/1 Drop = (33035968)NP Rx Priority 2/3 Drop = (1)NP Rx Priority 4/5 Drop = (0)NP Rx Priority 6/7 Drop = (0)NP Rx Suppress RPF Drop = (0)NP Rx RPF Drop = (0)NP Rx IPv4 Packet = (667856409353)NP Rx IPv6 Packet = (0)NP Rx Route-only Drop = (0)NP Rx IPv6 Suppress RPF Drop = (0)NP Rx IPv6 RPF Drop Count = (0)NP Rx IPv4 Byte = (184327873143207)NP Rx IPv6 Byte = (0)NP Rx Routed Packet Drop = (0)Port 1/1 TXNP Tx Sent to MAC Packet = (10548)NP Tx Raw Good Packet = (10568)NP Tx Source Port Supress Drop = (20)NP Tx Bad Packet Count = (0)NP Tx Unicast Packet = (1)NP Tx Broadcast Packet = (1)NP Tx Multicast Packet = (10546)NP Tx Receive from TM = (10568)NP Tx ACL Drop = (0)NP Tx IPv6 HW Forwarded Packet = (0)Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide 26153-1002426-02