Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

7ACLsclear access-list subnet-broadcast accounting globalSyntax: clear access-list subnet-broadcast accounting globalThis command clears the accounting information for an IP broadcast ACL at the global level.clear access-list subnet-broadcast accountingSyntax: clear access-list subnet-broadcast accounting [ethernet / | pos/ | ve ]This command clears the accounting information for an IP broadcast ACL at the IP interface level.The ethernet, pos, and ve keywords specify the interfaces for which you want to clear theaccounting information.ACL debug commandsThis section describes how to use diagnostic debug commands to monitor Layer 2 and Layer 4ACLs for Brocade NetIron XMR series and Brocade MLX series routers.NOTETo save space, date and time stamps have been removed from all output examples.In most Layer 4 instances, a debug command must be accompanied by a user activity, such asbinding or unbinding an ACL. In a few instances, background activity for Layer 4 ACLs is displayedsimply by enabling the debug function. Many of the debug ACL commands work in conjunction withrelated show commands, as described in the examples in this chapter.debug access-listSyntax: [no] debug access-list [accounting | ipv4 | ipv6 | l2 | mirror | policy-based-routing |rate-limit | receive | lsp-out-acl]• accounting - Displays ACL accounting statistics.• ipv4 - Displays information about IPv4 ACLs.• ipv6 - Displays information about IPv6 ACLs.• l2 - Displays information about Layer 2 ACLs.• mirror - Displays ACL-based mirroring.• policy-based-routing - Displays information about policy-based routing activity.• rate-limit - Displays information about ACL-based rate limiting.• receive - Displays information about IP receive ACLs.• lsp-out-acl - Displays information about Label Switched Path (LSP) accounting.debug access-list accountingSyntax: [no] debug access-list accountingThis command displays information about inbound or outbound ACL accounting activity. Thefollowing example shows inbound rate limit accounting for port 4/2.246 Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide53-1002426-02