Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

ACLs 7show access-list subnet-broadcast accountingSyntax: show access-list subnet-broadcast accounting [ethernet / | pos/ | ve ]• ethernet / - Specifies the Ethernet interface for which you want todisplay the accounting information.• pos / - Specifies the POS interface for which you want to display theaccounting information.• ve - Specifies the VE interface for which you want to display the accountinginformation.This command displays the accounting information for an IP broadcast ACL at the IP interface level,as shown in the following example.Brocade# show access-list subnet-broadcast accounting ethernet 4/1Subnet broadcast ACL 1200: permit udp host 10.10.10.1 host 20.20.20.255Hit count: (1 sec) 0 (1 min) 0(5 min) 0 (accum) 01: permit tcp host 10.10.10.1 host 20.20.20.255Hit count: (1 sec) 10 (1 min) 67(5 min) 0 (accum) 672: deny ip any anyHit count: (1 sec) 0 (1 min) 0(5 min) 0 (accum) 0show access-list subnet-broadcast accounting globalSyntax: show access-list subnet-broadcast accounting globalThis command displays the accounting information for an IP broadcast ACL at the global level, asshown in the following example.Brocade# show access-list subnet-broadcast accounting globalSubnet broadcast ACL 10: permit enable-accounting host 10.1.1.2Hit count: (1 sec) 2 (1 min) 150(5 min) 0 (accum) 384Clearing ACL statisticsStatistics on the ACL account report can be cleared in the following situations:• When a software reload occurs• When the ACL is bound to or unbound from an interface• When you enter the clear access-list commandclear access-listSyntax: clear access-list [all | ethernet / | pos / | ve]• all - Clears all statistics for all ACLs.• ethernet / - Clears statistics for ACLs on an Ethernet port.• pos / - Clears statistics for ACLs on a POS port.• ve - Clears statistics for all ACLs bound to ports that are members of a virtual routinginterface.Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide 24553-1002426-02