Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

ACL and QoS DiagnosticsChapter7This chapter provides diagnostic information for Access Control List (ACL) and Quality of Service(QoS) environments, including traffic management.ACLsAccess Control List (ACL) debug and show commands help users to diagnose and determine thecause of faults for ACL-related features. For details on Layer 2 ACLs, refer to the Layer 2 ACLchapter in the NetIron Series Configuration Guide.ACL show commandsThis section describes the show commands that display ACL information.show access-listSyntax: show access-list | allThis command displays the ACLs configured on a Brocade device.Enter the ACL number for the parameter:• 1 through 99 for standard ACLs• 100 through 199 for extended ACLsEnter all to display information for all ACLs configured on the device.For a numbered ACL, enter a command similar to the following example.Brocade# show access-list 99ACL configuration:!Standard IP access list 10access-list 99 deny host 10.10.10.1access-list 99 permit anyshow access-list nameSyntax: show access-list name Enter the ACL name for the parameter.For a named ACL, enter a command similar to the following example.Brocade# show access-list name entryStandard IP access list entrydeny host 5.6.7.8deny host 192.168.12.3|permit anyBrocade MLX Series and Brocade NetIron XMR Diagnostic Guide 24353-1002426-02