Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

6MPLS VPLSdebug vpls filterSyntax: [no] debug vpls filter [b-src-mac | b-dst-mac | dst-mac-address | id | inner-tag | outer-vlan| src-mac-address | src-port | topo-id | topo-hw-idx | vc-label | vpls-peer-ip-address]This command displays VPLS filtering options.• b-src-mac - Filter to include outer source MAC address.• b-dst-mac - Filter to include outer destination MAC address.• dst-mac-address - Filter to include destination MAC address (LP only).• id - Filter to include VPLS ID.• inner-tag - Filter to include inner-tag ID (VLAN or ISID).• outer-vlan - Filter to include VPLS outer VLAN.• src-mac-address - Filter to include source MAC address.• src-port - Filter to include source port.• topo-id - Filter to include topology group ID (MP only).• topo-hw-idx - Filter to include topology group hardware index (LP only).• vc-label - Filter to include local VC label.• vpls-peer-ip-address - Filter to include this VPLS peer IP address.NOTETo clear a specific filter, enter the no debug vpls filter id command from the MP or LPconsole.To clear all VPLS filters, enter the no debug vpls filter command from the MP or LP console.debug vpls forwardingSyntax: [no] debug vpls forwardingThis command is used to generate some CPU packet forwarding in regard to VPLS traffic. On the LP,it generates how the packet was received and how it was software forwarded. On the MP, itgenerates the packet handling of those applications such as Multicast or 802.1ag to send outcontrol packets through VPLS to a remote peer.Brocade# debug vpls forwardingVPLS Forwarding: debugging is onVPLS EGRESS FWD: lp_l2_vpls_outbound_process_packet() - RX pkt from MPLS uplinksrc-port:1/1. VC label:983040VPLS EGRESS FWD: lp_l2_vpls_outbound_process_packet() - DA missed in CAM.VPLS EGRESS FWD: lp_l2_vpls_outbound_forward_packet() - Payload Tag 0x81000008exisits.VPLS EGRESS FWD: lp_l2_vpls_outbound_forward_packet() - Unknown VPLS MAC0000.0203.0000, VPLS 1.VPLS EGRESS FWD: lp_l2_vpls_outbound_forward_packet() - UNKNOWN: send pkt to allend-points.VPLS EGRESS FWD: lp_l2_vpls_broadcast_local() - Bcast pkt to VPLS VLAN 300,inner_vid_valid:0 inner_vlan_id 0x00000000, FID 0x800b, Egress:1,priority:0x00000000, inner_vlan_priority:0x00000000VPLS EGRESS FWD: lp_l2_vpls_broadcast_local() - Bcast pkt to VPLS VLAN 3000,inner_vid_valid:0 inner_vlan_id 0x00000000, FID 0x800c, Egress:1,priority:0x00000000, inner_vlan_priority:0x00000000238 Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide53-1002426-02