Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

MPLS VPLS 6Brocade# debug vpls eventsBrocade(config-if-e1000-2/9)# disableVPLS EVENT-LSP: mpls_vpls_process_tnnl_down()- VPLS test1: Peer 5.5.5.5, tunnel1 is down.VPLS EVENT-LSP: mpls_vpls_del_vpls_peer_in_tnnl_list()- VPLS test1: Delete peer5.5.5.5 from tunnel-list of 1.VPLS EVENT-FSM: mpls_vpls_peer_fsm_step()- VPLS fsm: vpls test1 peer 5.5.5.5eventTNNL_DN st OPER->WAIT_TNNL act F.VPLS EVENT-FSM: mpls_vpls_peer_fsm_step()- VPLS: vpls test1 peer 5.5.5.5 is nowDOWN, num up peer->0.VPLS MAC-GROUP: vpls_mac_delete_remote_entry()- VPLS 1, VC-label 000f0000: HWCAMs flush 4.VPLS EVENT-PEER: mpls_vpls_send_vc_withdrawal()- VPLS 1, group 0, peer 5.5.5.5,Send label withdraw for 983040.(config-if-e1000-2/9)#enableVPLS EVENT-LDP: mpls_ldp_peer_session_ind()- VPLS test1, peer 5.5.5.5 LDPsession is down.VPLS EVENT-FSM: mpls_vpls_peer_fsm_ste ()- VPLS fsm: vpls test1 peer 5.5.5.5event LDP_DNst WAIT_TNNL->WAIT_TNNL act -.VPLS EVENT-LSP: mpls_vpl_process_tnnl_up()- VPLS test1: Peer 5.5.5.5, tunnel 1is up.VPLS EVENT-LSP: mplc_vpls_add_vpls_peer_in_tnnl_list() = VPLS test1: Add peer5.5.5.5 to tunnel-list of 1.VPLS EVENT-FSM: mpls_vpls_peer_fsm_step()- VPLS fsm: vpls test1 peer 5.5.5.5,send local-label 983040.VPLS EVENT-FSM: mpls_vpls_peer_fsm_step()- VPLSfsm: vpls test 1 peer 5.5.5.5eventRCV_LBL st WAIT_VC->OPER act D.VPLS EVENT-FSM: mpls_vpls_peer_fsm_step()- VPLS: vpls test1 peer 5.5.5.5 is nowUP, num up peer->1.debug vpls failoverSyntax: [no] debug vpls failoverThis command enables debugging of VPLS failover-related events, as shown in the followingexample.Brocade# debug vpls failoverVPLS Failover: debugging is onOct 8 18:36:36 VPLS DY-SYNC-TLV: mpls_vpls_pack_one_tlv_tsl_to_stdby() -Oct 8 18:36:36 VPLS FAILOVER: mpls_vpls_send_to_stdby_tlv_peer_tsl() - calledSYSLOG: Oct 8 18:36:37 FWD2(XMR12) System: Interface ethernet 1/19, statedown - link downSYSLOG: Oct 8 18:36:53 FWD2(XMR12) System: Interface ethernet 1/20, statedown - link downOct 8 18:36:53 VPLS DY-SYNC-TLV: mpls_vpls_pack_one_tlv_tsl_to_stdby() -Oct 8 18:36:53 VPLS FAILOVER: mpls_vpls_send_to_stdby_tlv_peer_tsl() - calledSYSLOG: Oct 8 18:36:53 FWD2(XMR12) MPLS: VPLS 1 peer 6.6.6.6 (VC ID 1) isdownSYSLOG: Oct 8 18:37:10 FWD2(XMR12) System: Interface ethernet 1/20, state uprldf_complete_lsi_rsv_conn_xc: update sync noderldf_complete_lsi_rsv_conn_xc: update sync node for VC FECrldf_complete_lsi_rsv_conn_xc: update sync node for VC FECOct 8 18:37:23 VPLS DY-SYNC-TLV: mpls_vpls_pack_one_tlv_tsl_to_stdby() -Oct 8 18:37:23 VPLS FAILOVER: mpls_vpls_send_to_stdby_tlv_peer_tsl() - calledSYSLOG: Oct 8 18:37:23 FWD2(XMR12) MPLS: VPLS 1 peer 6.6.6.6 (VC ID 1) is upBrocade MLX Series and Brocade NetIron XMR Diagnostic Guide 23753-1002426-02