Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

6MPLS VPLSdebug vpls cam updatesSyntax: [no] debug vpls cam updatesThis command generates debug output when a VPLS CAM or PRAM entry is being updated due to achange in the PRAM information in regard to a forwarding decision.debug vpls countSyntax: [no] debug vpls countThis command specifies the number of debug prints generated by the debug vpls command. Usethis command to limit high-volume displays such as MAC learning activity and certain dy-syncactivity.debug vpls dy-syncSyntax: [no] debug vpls dy-sync [local | mac | remote | tlv]• local - Displays information about VPLS local entry dy-sync.• mac - Displays information about VPLS MAC table dy-sync.• remote - Displays information about VPLS remote entry dy-sync.• tlv - Displays information about VPLS TLV dy-sync.This command monitors all VPLS dy-sync activity. Dy-sync is a method of synchronizing internalVPLS data between management and CPU cards. This includes VPLS configuration (TLV), localentry or endpoint status (local), remote entry or VPLS peer status (remote), and VPLS MAC tableactivity. This data is used generally for internal debugging.debug vpls dy-sync localSyntax: [no] debug vpls dy-sync localThis command generates information about local VPLS dy-sync activity. Command outputresembles the following example for a specified VLAN (VLAN ID 2).Brocade# debug vpls dy-sync localBrocade(config-mpls-vpls-test1)# vlan 2Brocade(config-mpls-vpls-test1-vlan-2)# no tag e 2/19VPLS MAC-GROUP: vpls_mac_delete_local_entry() - VPLS 1, port 2/19, vlan 2: HW CAMsflushed 620.VPLS DY-SYNC-LOC: mpls_vpls_pack_one_vpls_local_entry() - VPLS 1, action 2, vlan2, port 2/19,replace-vlan 0.VPLS DY-SYNC-TLV: mpls_vpls_pack_one_ipc_tlv_vpls_vlan_port() - VPLS 1, vlan 2,port 2/19.VPLS DY-SYNC-TLV: mpls_vpls_pack_one_ipc_tlv_port_config() - VPLS 1, port 2/19,vlan 2, mode 1.VPLS DY-SYNC-TLV: mpls_vpls_sync_timer() - Flush TLV packetVPLS DY-SYNC-LOC: mpls_vpls_sync_timer() - Flush LOCAL packetR4(config-mpls-vpls-test1-vlan-2)#R4(config-mpls-vpls-test1-vlan-2)#tag e 2/19VPLS DY-SYNC-TLV: mpls_vpls_pack_one_ipc_tlv_port_config() - VPLS 1, port 2/19,vlan 2, mode 1.VPLS DY-SYNC-LOC: vpls_mac_add_local_entry() - Add: VPLS 1, vlan 2, port 2/19.234 Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide53-1002426-02