12.07.2015 Views

Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

6MPLS LDPdebug mpls ldp adjacencySyntax: [no] debug mpls ldp adjacencyThis comm<strong>and</strong> displays information about MPLS LDP adjacencies.<strong>Brocade</strong># debug mpls ldp adjacencyLDP_ADJ: Link adjacency to 140.140.140.4:0 on interface e1/2 is deleted, reason 4LDP_ADJ: Link adjacency to 140.140.140.4:0 on interface e1/2 is addeddebug mpls ldp errorSyntax: [no] debug mpls ldp errorThis comm<strong>and</strong> displays the errors detected by LDP components such as LDP session keepalivetimer expiration, hello adjacency timeout, <strong>and</strong> so on.<strong>Brocade</strong># debug mpls ldp errorLDP_ERR: Session KeepAlive timer to peer 120.120.120.2 has expireddebug mpls ldp eventSyntax: [no] debug mpls ldp eventThis comm<strong>and</strong> displays session up <strong>and</strong> down events, similar to the following example.<strong>Brocade</strong># debug mpls ldp eventLDP_EVT: LDP session to 140.140.140.4, entity idx 1, type non-targeted goes DOWN,use TCB 0XA0000010:0X12BF2B70LDP_EVT: remove session to 140.140.140.4. Session is deletedLDP_EVT: initiate LDP session to peer 140.140.140.4. Session is not foundLDP_EVT: initiate session block 0X344BF140, entity idx 1 <strong>and</strong> insert to treeLDP_EVT: LDP session to 140.140.140.4 is initiated, targeted adjacency NoLDP_EVT: LDP session to 140.140.140.4, entity idx 1, type non-targeted goes UP,use TCB 0XA0000012:0X12BF244Adebug mpls ldp fecSyntax: [no] debug mpls ldp fec [all | lsr-id | key [prefix | vc ]]This comm<strong>and</strong> displays MPLS LDP FEC information.• all - Displays all MPLS LDP FEC-related information.• lsr-id - Limits the MPLS LDP FEC information displayed to aspecific LSR ID.• key - Limits the information displayed to a specific FEC key value.• prefix - Limits the display of MPLS LDP FEC-related information tospecific prefixes.• vc - Displays MPLS LDP FEC-related information for a specific VC ID.Comm<strong>and</strong> output resembles the following example.<strong>Brocade</strong># debug mpls ldp fecLDP PM 1 Ingress FSM, CB 171/33, input 0, old state 0, new state 0, action 1, FECCB 169/33,FEC Prefix: 100.100.100.100, len 32.LDP PM 1 Egress FSM, CB 205/45, input 0, old state 0, new state0, action 1, FEC CB 184/45,FEC Prefix: 20.20.20.20, len 32.LDP PM 1 UM FSM, CB 164/29, input 0, old state 0, new state 1, action 1, UT CB 101/5, session CB 117/25, FEC CB 184/45.FEC Prefix: 20.20.20.20, len 32.222 <strong>Brocade</strong> <strong>MLX</strong> <strong>Series</strong> <strong>and</strong> <strong>Brocade</strong> <strong>NetIron</strong> <strong>XMR</strong> <strong>Diagnostic</strong> <strong>Guide</strong>53-1002426-02

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!