Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

6MPLS LDPBrocade# show mpls ldp peer detailPeer LDP ID: 2.2.2.2:0, Local LDP ID: 1.1.1.1:0, State: OperationalSession Status UP, Entity Idx: 4, Targeted: No, Target Adj Added: YesNum VLL: 2, Num VPLS: 0Rcvd VC-FECs:From 2.2.2.2: Label: 800001, VC Id: 120, Grp_Id: 0, VC Type: 4Peer LDP ID: 8.8.8.8:0, Local LDP ID: 1.1.1.1:0, State: OperationalSession Status UP, Entity Idx: 2, Targeted: Yes, Target Adj Added: YesNum VLL: 2, Num VPLS: 0Rcvd VC-FECs:From 8.8.8.8: Label: 16, VC Id: 19, Grp_Id: 0, VC Type: 32773From 8.8.8.8: Label: 18, VC Id: 18, Grp_Id: 0, VC Type: 32772show mpls ldp fec prefixSyntax: show mpls ldp fec prefix [ |]This command displays the host address and prefix FECs from the LDP FEC database.Brocade# show mpls ldp fec prefixTotal number of prefix FECs: 3Destination State Out-intf Next-hop Ingress Egress2.2.2.2/32 current -- -- No Yes1.1.1.1/32 current e1/2 22.22.22.22 Yes Noe1/1 11.11.11.113.3.3.3/32 current gre-tnl200 33.33.33.33 No NoUse the and options for a detailed view of the specifiedFEC, as shown in the following example.Brocade# show mpls ldp fec prefix 125.125.125.1/32FEC_CB: 0x29391f8c, idx: 1, type: 2, pend_notif: NoneState: current, Ingr: Yes, Egr: No, UM Dist. done: NoPrefix: 125.125.125.1/32, next_hop: 90.90.90.20, out_if: e2/2Downstream mappings:Local LDP ID Peer LDP ID Label State CB128.128.128.28:0 125.125.125.1:0 3 Installed 0x29391cb0(-1)show mpls ldp fec summarySyntax: show mpls ldp fec summaryThis command displays LDP FEC summary information, as shown in the following example.Brocade# show mpls ldp fec summaryL3 FEC summary:Total number of prefix FECs: 2Total number of VC-FEC type 128: 0Total number of VC-FEC type 129: 0Total number of route update processing errors: 0Total number of VC FEC processing errors: 0218 Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide53-1002426-02