Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

6MPLS APIref_flags (1,4,2,2,1,0,2), update_flags 0X0000004C, lspxc_flags 0X00000000,rvs_ref flags (0,0,0,0,0,0,0), rvs_update_flags 0X00000000, rc 1,in_seg_index 0, xc_index 4251, out_seg_index 4071.Dec 10 01:20:04 LMGR 1 sent LSI_COMMON_LSP_XC SESSION (7.7.7.3, 0X1E24, 7.7.7.2)LSP (0X0001, 7.7.7.2),ref_flags (1,4,2,2,1,0,2), update_flags 0X0000004C, lspxc_flags 0X0000000C,rvs_ref flags (0,0,0,0,0,0,0), rvs_update_flags 0X00000000,in_seg_index 0, xc_index 4251, out_seg_index 4072.Dec 10 01:20:04 LMGR 1 rcvd LSI_COMMON_LSP_XC SESSION (7.7.7.3, 0X1E24, 7.7.7.2)LSP (0X0001, 7.7.7.2),ref_flags (1,4,2,2,1,0,2), update_flags 0X0000004C, lspxc_flags 0X0000000C,rvs_ref flags (0,0,0,0,0,0,0), rvs_update_flags 0X00000000, rc 1,in_seg_index 0, xc_index 4251, out_seg_index 4072.VLL debug commandsThis section describes the debug commands that generate VLL information.debug vllSyntax: [no] debug vll [events | fsm | ipc]• events - Displays debugging information related to VLL eventssuch as tunnel change, andbitmap change for syslogs.• fsm - Displays debugging information related to all VLL Finite State Machines (FSMs).• ipc - Displays debugging information related to Interprocess Communication (IPC) messagessent to the LP.Command output resembles the following example.Brocade# debug vll fsmMPLS: VLL FSM(Finite State Machine) debugging is onBrocade# debug vll eventsMPLS: VLL Events debugging is onBrocade# debug vll ipcMPLS: VLL IPC debugging is onBrocade(config)# router mplsBrocade(config-mpls)# no vll mct-vll-1 1Nov 21 02:42:51 VLL EVENTS: Unconfigured VLL 1 in Tagged-mode(default-mode)Nov 21 02:42:51 VLL_MCT_SYNC_MSG: VC-ID: 1 Send sync message (Type: [VLLdeletion]) is Success (err = 0)Nov 21 02:42:51 VLL EVENTS: Sending VC withdrawal for VLL 1, vll-index 0, pw-index0x00000003Nov 21 02:42:51 VLL EVENTS: Bitmap Event vll-index 0, min-index 0, max-index 0Nov 21 02:42:51 VLL EVENTS: Bitmap event is DOWN, min-index 0, max-index 0Nov 21 02:42:51 VLL EVENTS: Final Index min_index 0, max-index 0Nov 21 02:42:51 VLL IPC: Sending IPC to LP as VLL 1 changed to non-operationalwith config-deletionNov 21 02:42:51 VLL DY-SYNC: Trunk Outbound - vll_name = mct-vll-1, vll_id = 1,vll_port = 96, vlan_id = 401Nov 21 02:42:51 VLL DY-SYNC: Peer 11.0.0.3, remote_vc = 798761, tunnel_label = 0,mode TAGGED-MODE, action DELETE, PW_role Active, MCT_role Active, MCT_ID = 1,MCT_Client_ID = 3Nov 21 02:42:51 VLL DY-SYNC: vll_id = 1, vclabel = 798761, Peer 11.0.0.3, actionDELETE, PW_role Spoke, Forward_type PE_to_DROP, MCT_ID = 1, MCT_Client_ID = 3Nov 21 02:42:51 VLL DY-SYNC: vll_id = 1, vclabel = 798773, Peer 11.0.0.1, actionADD, PW_role Standby, Forward_type PE_to_DROP, MCT_ID = 1, MCT_Client_ID = 3Nov 21 02:42:51 VLL DY-SYNC: vll_id = 1, vclabel = 798774, Peer 11.0.0.2, actionADD, PW_role Active, Forward_type PE_to_EP, MCT_ID = 1, MCT_Client_ID = 3212 Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide53-1002426-02