Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

MPLS API 6MPLS API debug commandsThis section describes the debug commands that generate debugging information about MPLS API.debug mpls apiSyntax: [no] debug mpls apiThis command displays debugging information about MPLS API, as shown in the following example.Brocade# debug mpls apiBrocade# router isisAug 18 21:32:18 mpls_app_register_tnnl_name app_type MPLS_APP_ISIS is registeredAug 18 21:32:18 sending event queued itc to app_type MPLS_APP_ISIS dest_app_id 15Brocade# no router isisAug 18 21:32:10 mpls_app_deregister_igp_shortcut app_type MPLS_APP_ISIS isde-registeredBrocade# ip route next-hop-enable-mplsJan 11 04:53:38 mpls_api dest addr registering MPLS_APP_IP_STATIC value 1.1.1.1Jan 11 04:53:38 mpls_app_lookup_dest_ipaddr MPLS_APP_IP_STATIC app_type initremote addr 1.1.1.1Jan 11 04:53:38 mpls_app_lookup_dest_ipaddr MPLS_APP_IP_STATIC app_typeregistered for remote addr 1.1.1.1Jan 11 04:53:38 send dest addr snapshotJan 11 04:53:38 sending event queued itc to app_type MPLS_APP_IP_STATICdest_app_id 12Jan 11 04:53:38 mpls_app_tunnel_deregisterJan 11 04:53:38 mpls_app_deregister_dest_addr app_type MPLS_APP_IP_STATICdest_addr 10.20.160.1Jan 11 04:53:40 mpls_app_tunnel_deregisterJan 11 04:53:40 mpls_app_deregister_dest_addr app_type MPLS_APP_IP_STATICdest_addr 10.20.160.1Brocade# no ip route next-hop-enable-mplsJan 11 04:53:31 mpls_app_deregister_all app_type MPLS_APP_IP_STATIC isde-registeredBrocade# set next-hop-lsp to-mlxE-1Jan 11 04:55:59 mpls_app_register_tnnl_name app_type MPLS_APP_PBR tnnl nameto-mlxE-1 registeredJan 11 04:55:59 mpls_app_send_tnnl_name_snapshot app_type MPLS_APP_PBR tnnl nameto-mlxE-1 sending snapshotJan 11 04:55:59 mpls_app_register_tnnl_name app_type MPLS_APP_PBR tnnl nameto-mlxE-1 sending snapshotJan 11 04:55:59 sending event queued itc to app_type MPLS_APP_PBR dest_app_id 27Brocade# no set next-hop-lsp to-mlxE-1Jan 11 04:55:52 mpls_app_deregister_name app_type MPLS_APP_PBR tnnl_nameto-mlxE-1 is deregisteredBrocade# next-hop-mplsJan 11 05:05:42 mpls_api dest addr registering MPLS_APP_BGP value 1.1.1.1Jan 11 05:05:42 mpls_app_lookup_dest_ipaddr MPLS_APP_BGP app_type init remoteaddr 1.1.1.1Jan 11 05:05:42 mpls_app_lookup_dest_ipaddr MPLS_APP_BGP app_type registered forremote addr 1.1.1.1Jan 11 05:05:42 send dest addr snapshotJan 11 05:05:42 sending event queued itc to app_type MPLS_APP_BGP dest_app_id 13Jan 11 05:05:42 mpls_api dest addr registering MPLS_APP_BGP value 1.1.1.2Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide 19753-1002426-02