Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

6MPLSThis command displays global revertiveness configuration and Fast Reroute (FRR) adaptiveconfiguration information for the specified LSP name.Brocade# show mpls lsp name tunnel1LSP tunnel1, to 3.3.3.3From: 2.2.2.2, admin: UP, status: UP, tunnel interface(primary path): tnl0Times primary LSP goes up since enabled: 1Metric: 0, number of installed aliases: 0 AdaptiveMaximum retries: NONE, no. of retries: 0Pri. path: p1, up: yes, active: yesSetup priority: 7, hold priority: 0Max rate: 0 kbps, mean rate: 0 kbps, max burst: 0 bytesConstraint-based routing enabled: yesPath calculated using constraint-based routing: yesPath calculated using interface constraint: yesTie breaking: random, hop limit: 0LDP tunneling enabled: noActive Path attributes:Tunnel interface: tnl0, outbound interface: e1/1Tunnel index: 1, Tunnel instance: 2 outbound label: 3Explicit path hop count: 110.10.10.6 (S)Recorded routes:Protection codes: P: Local N: Node B: Bandwidth I: InUse10.10.10.6Fast Reroute: facility backup desiredSetup priority: 0, hold priority: 0Hop Limit: 3Exclude any of admin groups: 2Include any of admin groups: 5 6Include all of admin groups: 5Backup LSP: UP, out-label: 3, outbound interface: e1/3 bypass_lsp: by1Path cspf-group computation-mode: disabledGlobal revertiveness enabled with hold time 20 secsFRR Forwarding State: Pri(active), Backup(up)show mpls statistics labelSyntax: show mpls statistics label This command displays the MPLS statistics for a specific interface, as shown in the followingexample.Brocade# show mpls statistics label 6/1In-label In-Port(s) In-Packet Count1024 e6/1 - e6/2 01025 e6/1 - e6/2 21652924531show mpls debug flooding-thresholdsSyntax: show mpls debug flooding-thresholdsThis command displays the current bandwidth in percentage and thresholds in use, as shown inthe following example.Brocade# show mpls debug flooding-thresholdsInterface : e4/3New Reserved BW percentage : 40Old Reserved BW percentage(Advertised) : 35UP threshold Config in use: DefaultDOWN threshold Config in use: DefaultLast up threshold trigger : 30192 Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide53-1002426-02