Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

5IS-IS• l1-csnp - Displays level 1 CSNP PDU information.• l1-hello - Displays level 1 hello PDU information.• l1-lsp - Displays level 1 LSP PDU information.• l1-psnp - Displays level 1 PSNP PDU information.• l2-csnp - Displays level 2 CSNP PDU information.• l2-hello - Displays level 2 hello PDU information.• l2-lsp - Displays level 2 LSP PDU information.• l2-psnp - Displays level 2 PSNP PDU information.• lsp-flood - Displays information about LSP flooding.• lsp-dump - Displays a dump of context-specific LSP contents.• memory - Displays memory information.• nsr - Displays IS-IS nonstop routing information.• pp-hello - Displays PP hello PDU information.• ppp - Displays OSI Point-to-Point Protocol (PPP) information.• pspf - Displays IS-IS partial SPF information.• pspf-detail - Displays IS-IS partial SPF information details.• redistribution - Displays IS-IS route redistribution information.• route-table - Displays IS-IS route table information.• spf - Displays IS-IS SPF information.• spf-log - Displays information about the SPF log.• te - Displays information about IS-IS traffic engineering.• trace - Displays trace information for the IS-IS code path.debug isis adjSyntax: [no] debug isis adjThis command generates information about IS-IS adjacencies. Command output resembles thefollowing example.Brocade# debug isis adjISIS: Clearing all adjacencies on 1/1ISIS: Deleting PTPT Adj to rtr1 on 1/1 from HT Timer for HT 30 Index 1]ISIS: L1 DIS change on 1/4 to rtr2-3ISIS: L2 DIS change on 1/4 to rtr2-3ISIS: Deleting PTPT Adj to rtr1 on 1/1 [HoldTimer expiry]ISIS: Deleting PTPT Adj to rtr1 on 1/1 from HT Timer for HT 30 [Index 0]ISIS: Deleting PTPT Adj to rtr1 on 1/2 [HoldTimer expiry]ISIS: Deleting PTPT Adj to rtr1 on 1/2 from HT Timer for HT 30 [Index 1]ISIS: Adding PTPT Adj 0000.0000.0001 on 1/1 to HT Timer for HT 30 [Index 0]ISIS: Adding PTPT Adj 0000.0000.0000 on 1/2 to HT Timer for HT 7680 [Index 1]ISIS: L1 DIS change on 1/4 to rtr2-3ISIS: L2 DIS change on 1/4 to rtr2-3ISIS: L1 DIS change on 1/4 to rtr2-3ISIS: Adding PTPT Adj rtr1 on 1/1 to HT Timer for HT 30 [Index 0]ISIS: Adding PTPT Adj rtr1 on 1/2 to HT Timer for HT 30 [Index 1]168 Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide53-1002426-02