Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

5OSPFshow ip ospf border-routersSyntax: show ip ospf border-routers []• - Displays the ABR and ASBR entries for the specified IP address.This command displays OSPF ABR and ASBR information, as shown in the following example.Brocade# show ip ospf border-routersrouter ID router type next hop router outgoing interface Area1 10.65.12.1 ABR 10.1.49.2 v49 01 10.65.12.1 ASBR 10.1.49.2 v49 01 10.65.12.1 ABR 10.65.2.251 v201 651 10.65.12.1 ASBR 10.65.2.251 v201 65show ip ospf trapSyntax: show ip ospf trapAll traps are enabled by default when you enable OSPF. This command displays the state of eachOSPF trap.Brocade# show ip ospf trapInterface State Change Trap:Virtual Interface State Change Trap:Neighbor State Change Trap:Virtual Neighbor State Change Trap:Interface Configuration Error Trap:Virtual Interface Configuration Error Trap:Interface Authentication Failure Trap:Virtual Interface Authentication Failure Trap:Interface Receive Bad Packet Trap:Virtual Interface Receive Bad Packet Trap:Interface Retransmit Packet Trap:Virtual Interface Retransmit Packet Trap:Originate LSA Trap:Originate MaxAge LSA Trap:Link State Database Overflow Trap:Link State Database Approaching Overflow Trap:EnabledEnabledEnabledEnabledEnabledEnabledEnabledEnabledEnabledEnabledDisabledDisabledDisabledDisabledDisabledDisabledshow runSyntax: show runThis command displays OSPF virtual neighbor and virtual link information, as shown in thefollowing example.Brocade# show runCurrent configuration:ver V2.2.1T143module 1 rx-bi-1g-24-port-fibermodule 2 rx-bi-10g-4-portmodule 6 rx-bi-10g-4-portmodule 7 rx-bi-1g-24-port-copper!no spanning-tree!vlan 1 name DEFAULT-VLAN!clock summer-timeclock timezone us Pacific138 Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide53-1002426-02