Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide ...

OSPF 5show ip ospf redistribute routeSyntax: show ip ospf redistribute route [ ]• - Specifies a destination IP address for which to display route entries.• - Specifies the route mask.This command displays routes that have been redistributed into OSPF.Brocade# show ip ospf redistribute route4.3.0.0 255.255.0.0 static3.1.0.0 255.255.0.0 static10.11.61.0 255.255.255.0 connected4.1.0.0 255.255.0.0 staticIn this example, four routes have been redistributed. Three of the routes were redistributed fromstatic IP routes and one was redistributed from a directly-connected IP route.To display route redistribution for a specific IP address and mask, enter the following command asshown in the following example.Brocade# show ip ospf redistribute route 3.1.0.0 255.255.0.03.1.0.0 255.255.0.0 staticshow ip ospf databaseSyntax: show ip ospf databaseThis command displays the OSPF database, as shown in the following example.Brocade# show ip ospf databaseGraceful Link StatesArea Interface Adv Rtr Age Seq(Hex) Prd Rsn Nbr Intf IP0 eth 1/2 2.2.2.2 7 80000001 60 SW 6.1.1.2Router Link StatesIndex AreaID Type LS ID Adv Rtr Seq(Hex) Age CksumSyncState1 0 Rtr 2.2.2.2 2.2.2.2 80000003 93 0xac6cDone2 0 Rtr 1.1.1.1 1.1.1.1 80000005 92 0x699eDone3 0 Net 16.1.1.2 2.2.2.2 80000002 93 0xbd73Done4 0 OpAr 1.0.0.3 1.1.1.1 80000005 83 0x48e7Done5 0 OpAr 1.0.0.2 2.2.2.2 80000006 80 0x50daDone6 111.111.111.111 Rtr 1.1.1.1 1.1.1.1 80000004 142 0x0a38Done7 111.111.111.111 Summ 1.1.1.1 1.1.1.1 80000001 147 0x292bDone8 111.111.111.111 OpAr 1.0.0.2 1.1.1.1 80000002 179 0x063fDoneType-5 AS External Link StatesIndex Age LS ID Router Netmask Metric Flag Fwd Address1 147 9.9.1.13 1.1.1.1 ffffffff 0000000a 0000 0.0.0.02 147 9.9.1.26 1.1.1.1 ffffffff 0000000a 0000 0.0.0.0Brocade MLX Series and Brocade NetIron XMR Diagnostic Guide 13553-1002426-02