Buffalo Wild Wings

Buffalo Wild WingsPART 1—GENERAL1.01 SUMMARYA. Section Includes:1. Definitions of terms.2. Provisions of reference standards.1.02 DEFINITIONSSECTION 01620 - REFERENCESA. By Owner: Items that will be ordered, paid for and shipped to Project by Owner. Contractor toreceive, unload, unpack or uncrate, protect, move into place, install and connect these items asspecified or indicated in the Contract Documents.B. Provide: Furnish and install, including without limitation, labor, materials, equipment,transportation, services, and other items required to complete referenced tasks.C. Furnish: Pay for, deliver (or receive), unload, inspect, and store as specified or directed whileretaining care, custody and control until received for installation by others.D. Install: Receive, set or place in position, make required connections, adjust and test forsatisfactory performance and operation.E. Product: Materials, systems, and equipment incorporated in or to be incorporated in the Project.F. Herein: As used in the Contract Documents refers to the contents of a particular Section, of thecontents within parts of the Conditions of the Contract and Division 1 - General Requirements.G. Not In Contract (N.I.C.): Products not in the Contract, but which may require provisions in theconstruction for future installation by Others.H. Work: Construction and services required by Contract Documents, whether completed ofpartially completed, and includes labor, materials, equipment and services provided or to beprovided by Contractor to fulfill the Contractor’s obligations. The Work may constitute the wholeor a part of the Project.1.03 REFERENCE STANDARDSA. Reference Standards: For products or workmanship specified by association, trade, FederalStandards, or other reference standards, comply with requirements of the standard, exceptwhen more rigid requirements are specified or are required by governing regulations.B. Standard Dates: Where no specific date of standard is specified, use the most current issuedstandard that is in effect as of the Project Bid date.C. When required by individual Specification Sections or otherwise needed for proper performanceof Work, obtain a copy of the standard. Maintain a copy of standard at Site during submittals,planning, and progress of the affected work, until Substantial Completion.PART 2 PRODUCTSNot usedPART 3 EXECUTIONNot UsedEND OF SECTION04-27-11 REFERENCES01620 -1