Product line up CEEW - McQuay

Product Line-upMWM-GW Product line-upClassificationModel nameNomenclaturePCB - W2G11 Heatpump Handset with IonizerG11 Cooling Handset with IonizerValve/ValvelessCool/HeatCE markIonizer filterNano filterLeft piping1/2" BSP (female) brass adaptorMWM007GW010GW015GW020GW025GWAXAA x x x x x x x x xAXAB x x x x x x x x xAXAA x x x x x x x x xAXAB x x x x x x x x xAXAA x x x x x x x x xAXAB x x x x x x x x xAXAA x x x x x x x x xAXAB x x x x x x x x xAXAA x x x x x x x x xAXAB x x x x x x x x x

Application InformationG11 REMOTE CONTROLLERTemperature Setting• To set the desired roomtemperature, press the button toincrease or decrease the settemperature.• The temperature setting range isfrom 16°C to 30°C• Press both buttons simultaneouslyto toggle the temperature settingbetween °C and °FTurbo Mode• Press the TURBO button toachieve the required settemperature in a short time.On/Off Button• Press Once to start the airconditioner• Press again to stop the unitPersonalised Setting• Press and hold the button for 3s toinitiate personalized setting.• Set the individual setting e.g.MODE, SET TEMP or FAN SPEEDand leave for 4s to save• 2 groups of settings are allowed tostored in the handsetSleep Mode• Press the button to activate sleepmode. This function is availableunder COOL & HEAT mode.• When it is activated in COOLmode, the set temperature will beincreased 0.5°C after 30mins, 1°Cafter 1 hour and 2°C after 2 hours.• When it is activated in HEATmode, the set temperature will bedecreased 1°C after 30mins, 2°Cafter 1 hour and 3°C after 2 hours.ON Timer Setting• Press the SET button will activatethe on timer function.• Set the desired on time bypressing the SET buttoncontinuously.• Press the CLR button to cancel theoff timer settingFan Speed Selection• Press the button until the desiredfan speed is achieved.Operating Mode• Press the MODE button to selectthe type of operating mode.• For Cooling only unit, the availablemodes are: COOL, DRY & FAN.• For Heatpump unit, the availablemodes are: COOL, DRY, FAN &HEAT.OFF Timer Setting• Press the SET button will activatethe off timer function.• Set the desired off time bypressing the SET buttoncontinuously.• Press the CLR button to cancel theoff timer settingClock Time Setting• Press button + or - to increase ordecrease the clock time.Ionizer• Press the button to activate thenegative Ion function, which willrefresh the indoor air effectively.Automatic Air Awing• Press the SWING button toactivate the automatic air swingfunction.• To distribute the air to a specificdirection, press the SWING buttonand wait until the louver move tothe desired direction and press thebutton once again.

Sound dataSound pressure levelWall Mounted G Split TypeModelMWM007GWMWM010GWMWM015GWMWM020GWMWM025GWSpeed1/1 Octave Sound pressure level (dB, ref 20μPa) Overall Noise125Hz 250Hz 500Hz 1 kHz 2 kHz 4 kHz 8 kHz (dBA) criteriaHIGH 32 34 38 37 32 23 15 40 36MEDIUM 27 30 34 32 26 17 14 35 31LOW 24 27 29 26 20 13 13 29 24HIGH 28 34 37 36 31 22 13 39 35MEDIUM 27 30 33 31 25 17 12 34 30LOW 24 26 28 25 19 12 11 28 23HIGH 30 35 39 38 33 25 15 42 37MEDIUM 28 31 34 33 26 18 13 36 32LOW 24 26 28 26 20 13 12 29 24HIGH 37 44 42 37 34 25 15 49 37MEDIUM 34 40 39 34 30 21 14 43 34LOW 30 35 35 30 26 18 13 40 30HIGH 40 48 48 45 44 35 27 50 45MEDIUM 38 46 47 42 42 33 25 48 42LOW 36 42 44 39 38 29 23 44 39Microphone posidtion : 1 m in front of the unit and 0.8 m below the vertical center line of the unit ( JIS C 9612 )

Water Flow Rate vs Pressure DropMODELSMWM007GWMWM010GWMWM015GWMWM020GWMWM025GWFLOW RATEWATER PRESSURE DROPLITRES/M USGPM kPa PSI4.20 1.11 15.00 2.185.60 1.48 24.85 3.617.00 1.85 37.00 5.378.40 2.22 51.60 7.499.80 2.59 68.23 9.904.79 1.27 17.65 2.566.39 1.69 29.54 4.297.99 2.11 44.00 6.399.58 2.53 61.16 8.8811.18 2.95 81.02 11.765.40 1.43 23.57 3.427.21 1.90 39.56 5.749.01 2.38 59.00 8.5610.81 2.86 82.15 11.9212.61 3.33 108.90 15.817.99 2.11 12.37 1.8010.66 2.82 20.70 3.0113.32 3.52 31.00 4.5015.99 4.22 43.55 6.3218.65 4.93 57.92 8.418.28 2.19 13.13 1.9111.04 2.92 21.99 3.1913.80 3.65 33.00 4.7916.56 4.38 46.34 6.7319.32 5.10 61.62 8.94Note:a. PRESSURE DROP CORRECTION FACTOR = 1.2947 - 0.0021 * (EWT °C * 1.8 + 32)b. PRESSURE DROP CORRECTION FACTOR = 1.2947 - 0.0021 * EWT °F

Engineering & Physical dataGeneral Data - MWM-GWMODELMWM007GW MWM010GW MWM015GWNOMINAL TOTAL COOLING CAPACITYNOMINAL SENSIBLE COOLING CAPACITYBtu/hBtu/h8000592095006935110008030WW234017322780202932202351NOMINAL TOTAL HEATING CAPACITY (ENTERING Btu/h 18000 21600 24200WATER TEMP. = 70°C)W 5280 6330 7090HIGH l/s / CFM 130 / 275 142 / 300 163 / 345NOMINAL AIR FLOWMEDIUM l/s / CFM 106 / 225 118 / 250 135 / 285LOW l/s / CFM 83 / 175 94 / 200 104 / 220HEIGHT mm/in 260 / 10.2260 / 10.2UNIT DIMENSIONWIDTH mm/in 799 / 31.5899 / 35.4DEPTH mm/in 198 / 7.8198 / 7.8HEIGHT mm/in 337 / 13.3337 / 13.3PACKING DIMENSIONWIDTH mm/in 857 / 33.7957 / 37.7DEPTH mm/in 270 / 10.6270 / 10.6UNIT WEIGHTkg/lb 10 / 22.112 / 26.5SOUND PRESSURE LEVEL ( H/M/L )dBA 40 / 35 / 29 39 / 34 / 28 42 / 36 / 29NOMINAL WATER FLOW RATEHEAD LOSS (COOLING)HEAD LOSS (HEATING) : 70°CMAX. WORKING PRESSURESURFACE AIR VELOCITYUSGPM 1.85 2.11 2.38LITRES/M 7.00 8.00 9.00kPa / psi 41 / 5.9 54 / 7.8 67 / 9.7kPa / psi 37 / 5.4 44 / 6.4 59 / 8.6kPa / psi1608 / 233m/s 0.65 0.61 0.70ft/min 127.3 119.2 137.1FAN COIL WATER VOLUME & MASScm 3 / kg 653 / 6.5 737 / 7.4 737 / 7.4CONNECTION1/2" BSP FEMALE ADAPTORROOM TEMPERATUREMICRO-COMPUTER CONTROLLED THERMOSTATCONTROLAIR DISCHARGEAUTOMATIC LOUVER (UP& DOWN)OPERATIONLCD WIRELESS MICRO-COMPUTER REMOTE CONTROLCONDENSATE DRAIN SIZEmm/in16 / 0.631) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253.3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW :a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F)b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP. : 70°C (158°F), LEAVING WATER TEMP. : 65°C (149°F)4) SOUND PRESSURE LEVEL ARE ACCORDING TO JIS C 9612 STANDARD. MWMFW : POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT AND0.8m BELOW THE UNIT. MWM301W : 1m IN FRONT AND 1 m BELOW THE DISCHARGE OPENING OF THE UNIT (JIS B 8615)

General Data - MWM-GWMODELMWM020GWMWM025GWNOMINAL TOTAL COOLING CAPACITYNOMINAL SENSIBLE COOLING CAPACITYBtu/hBtu/h16500131201800014760WW4840384852704326NOMINAL TOTAL HEATING CAPACITY (ENTERING Btu/h 35000 40500WATER TEMP. = 70°C)W 10260 11870HIGH l/s / CFM 297 / 630 312 / 660NOMINAL AIR FLOWMEDIUM l/s / CFM 231 / 490 274 / 580LOW l/s / CFM 208 / 440 222 / 470HEIGHTmm/in304 / 12.0UNIT DIMENSIONWIDTHmm/in1062 / 41.8DEPTHmm/in222 / 8.7HEIGHTmm/in378 / 14.9PACKING DIMENSIONWIDTHmm/in1130 / 44.5DEPTHmm/in292 / 11.5UNIT WEIGHTkg/lb 16 / 35.3 16 / 35.3SOUND PRESSURE LEVEL ( H/M/L )dBA 49 / 43 / 40 50 / 48 / 44NOMINAL WATER FLOW RATEUSGPM 3.52 3.65LITRES/M 13.33 13.83HEAD LOSS (COOLING)kPa / psi 37 / 5.4 41 / 5.9HEAD LOSS (HEATING) : 70°CkPa / psi 31 / 4.5 33 / 4.8MAX. WORKING PRESSUREkPa / psi1608 / 233SURFACE AIR VELOCITYm/s 1.10 1.16ft/min 217.2 228.0FAN COIL WATER VOLUME & MASScm 3 / kg 1023 / 10.2 1023 / 10.2CONNECTION1/2" BSP FEMALE ADAPTORROOM TEMPERATUREMICRO-COMPUTER CONTROLLED THERMOSTATCONTROLAIR DISCHARGEAUTOMATIC LOUVER (UP& DOWN)OPERATIONLCD WIRELESS MICRO-COMPUTER REMOTE CONTROLCONDENSATE DRAIN SIZEmm/in20 / 0.791) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253.3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW :a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F)b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP. : 70°C (158°F), LEAVING WATER TEMP. : 65°C (149°F)4) SOUND PRESSURE LEVEL ARE ACCORDING TO JIS C 9612 STANDARD. MWMFW : POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT AND0.8m BELOW THE UNIT. MWM301W : 1m IN FRONT AND 1 m BELOW THE DISCHARGE OPENING OF THE UNIT (JIS B 8615)

Components DataMWM-GWMODELFANFAN MOTORCOILAIR FILTERCASINGMWM007GW MWM010GW MWM015GWTYPEANTI FUNGUS SKEW FANQ'TY1 1 1MATERIALACRYLO NITRILE STYRENEDRIVEDIRECTLENGTH x DIAMETERmm/in 617.5 x 97 ( 24.3 x 3.8 )717.5 x 97 ( 28.2 x 3.8 )TYPEINDUCTIONQ'TY1 1 1INDEX OF PROTECTION (IP)IP24 IP24 IP24TYPECROSS FINNED TUBESMATERIALPLAIN COPPERTUBE DIAMETER mm/in7.00 / 0.28THICKNESS mm/in0.32 / 0.013MATERIALALUMINIUMTHICKNESS mm/in0.11 / 0.004FIN FACE AREAROWFIN PER INCHm 2 / ft 2 0.20 / 2.162180.23 / 2.52218MATERIALWASHABLE SARANNET (NANO FILTER)SIZE ( L x W x t ) mm/in304 x 298 x 1.5 ( 11.9 x 11.7 x 0.1 )MATERIALHIGH IMPACT POLYSTYRENECOLOURLIGHT GREYMODELFANFAN MOTORCOILAIR FILTERCASINGTYPEQ'TYMATERIALDRIVELENGTH x DIAMETERmm/inTYPEQ'TYINDEX OF PROTECTION (IP)TYPEMATERIALTUBE DIAMETER mm/inTHICKNESS mm/inMATERIALTHICKNESS mm/inFIN FACE AREA m 2 / ft 2ROWFIN PER INCHMATERIALSIZE ( L x W x t )mm/inMATERIALCOLOURMWM020GWMWM025GWCROSS FLOW FAN1 1ACRYLO NITRILE STYRENEDIRECT810 x 108 ( 31.9 x 4.3 )INDUCTION1 1IP20IP20CROSS FINNED TUBESPLAIN COPPER7.00 / 0.280.32 / 0.013ALUMINIUM0.11 / 0.0040.27 / 2.90218WASHABLE SARANNET (NANO FILTER)351 x 386 x 105 ( 13.8 x 15.2 x 0.1 )HIGH IMPACT POLYSTYRENELIGHT GREY1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.

Performance dataCooling Capacity Performance ChartModel : MWM007GW

Model : MWM010GW

Model : MWM015GW

Model : MWM020GW

Model : MWM025GW

Heating Capacity Performance ChartMWM~GW15.0MWM025GWHeating Capacity (kW)13.011.09.07.05.0MWM007GWMWM010GWMWM015GWMWM020GW3.02.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0Water Flowrate (L/min)

Dimensional dataModel : MWM007GWModel : MWM010/015GW

Model : MWM020/025GW

Electrical DataMWM-GWMODELFAN MOTORMODELFAN MOTORMWM007GW MWM010GW MWM015GWINSULATION GRADEB B BPOWER SOURCE V/Ph/Hz 220 - 240 / 1 / 50 220 - 240 / 1 / 50 220 - 240 / 1 / 50RATED INPUT POWER W 24 26 29RATED RUNNING CURRENT A 0.11 0.11 0.13MOTOR OUTPUT W 8 9 13POLES4 4 4MWM020GWMWM025GWINSULATION GRADEBBPOWER SOURCE V/Ph/Hz 220 - 240 / 1 / 50 220 - 240 / 1 / 50RATED INPUT POWER W 69 70RATED RUNNING CURRENT A 0.29 0.29MOTOR OUTPUT W 25 55POLES4 41) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151.

Wiring DiagramsModel : MWM007/010/015GW

Model : MWM020/025GW

Exploded View & Part listModel : MWM007GWNO DESCRIPTION PART NO NO DESCRIPTION PART NO1 ASSY, CHASSIS 50124064147 8 DRAIN HOSE 100240182042 FAN, MOTOR 03034064425 9 ASSY, CONTROL BOX 500440843443 CROSS FLOW FAN 03029019462 10ASSY, CONTROL BOXCOVER501240835064 FAN, BUSH 11014029514 11 ASSY, FRONT COVER R501240848055 ASSY, COIL 50024083241 12ASSY, AIRDISCHARGER50124085606HOUSING6 PIPING, CLAMP 12014060544 13SCREW, S.T.ROUNDHEAD BTR070140170477 ASSY, DRAIN PAN 50124088185

Model : MWM010/015GWNO DESCRIPTION PART NO NO DESCRIPTION PART NO1 ASSY, CHASSIS 50124064151 8 ASSY, DRAIN PAN 501240881862 FAN, MOTOR (10G) 03034071487 9 DRAIN HOSE 100240182042 FAN, MOTOR (15G) 03034064426 10 ASSY, CONTROL BOX 500440843443 CROSS FLOW FAN 03029019461 11ASSY, CONTROL BOXCOVER501240835065 FAN, BUSH 11014029514 12 ASSY, FRONT COVER R501240802426 ASSY, COIL 50024082590 13ASSY, AIRDISCHARGER50124085608HOUSING7 PIPING, CLAMP 12014060544 14SCREW, S.T.ROUNDHEAD BTR07014017047

Model : MWM020/025GWNO DESCRIPTION PART NO NO DESCRIPTION PART NO1 ASSY, CHASSIS 50124068170 9 ASSY, CONTROL BOX 500440843482 FAN, MOTOR (20GW) 03034074204 10 COVER, PIPING 120140681642 FAN, MOTOR (25GW) 03039028559 11ASSY, CONTROL BOXCOVER501240850803 CROSS FLOW FAN 03019007388 12 ASSY, FRONT COVER R501240714244 FAN, BUSH 11014023775 13 SERVICE PANEL R120140668255 ASSY, COIL 50024082602 14ASSY, AIRDISCHARGER50124071426HOUSING6 PIPING, CLAMP 12014071297 15ASSY, MOUNTINGPLATER500140361337 ASSY, DRAIN PAN 50124088187 16SCREW, S.T.ROUNDHEAD BTR070140170478 DRAIN HOSE 10024015319 17 RIVET 07074027137