MATLAB Function Reference (Volume 2: Graphics)

Figure PropertiesPaperPosition four-element rect vectorLocation on printed page. A rectangle that determines the location of the figureon the printed page. Specify this rectangle with a vector of the formrect = [left, bottom, width, height]where left specifies the distance from the left side of the paper to the left sideof the rectangle and bottom specifies the distance from the bottom of the pageto the bottom of the rectangle. Together these distances define the lower-leftcorner of the rectangle. width and height define the dimensions of therectangle. The PaperUnits property specifies the units used to define thisrectangle.PaperPositionModeauto | {manual}WYSIWYG printing of figure. In manual mode, MATLAB honors the valuespecified by the PaperPosition property. In auto mode, MATLAB prints thefigure the same size as it appears on the computer screen, centered on the page.PaperSize[width height] (read only)Paper size. This property contains the size of the current PaperType, measuredin PaperUnits. See PaperType to select standard paper sizes.PaperTypeSelect a value from the following tableSelection of standard paper size. This property sets the PaperSize to the one ofthe following standard sizes.Property Valueusletter (default)uslegaltabloidA0A1A2A3Size (Width x Height)8.5-by-11 inches11-by-14 inches11-by-17 inches841-by-1189mm594-by-841mm420-by-594mm297-by-420mm2-178