MATLAB Function Reference (Volume 2: Graphics)

ezmeshPurpose2ezmeshEasy to use 3-D mesh plotterSyntaxDescriptionRemarksezmesh(f)ezmesh(f,domain)ezmesh(x,y,z)ezmesh(x,y,z,[smin,smax,tmin,tmax]) or ezmesh(x,y,z,[min,max])ezmesh(...,n)ezmesh(...,'circ')ezmesh(f) creates a graph of f(x,y), where f is a string that represents amathematical function of two variables, such as x and y.The function f is plotted over the default domain: -2π < x < 2π, -2π < y < 2π.MATLAB chooses the computational grid according to the amount of variationthat occurs; if the function f is not defined (singular) for points on the grid, thenthese points are not plotted.ezmesh(f,domain) plots f over the specified domain. domain can be either a4-by-1 vector [xmin, xmax, ymin, ymax] or a 2-by-1 vector [min, max] (where,min < x < max, min < y < max).If f is a function of the variables u and v (rather than x and y), then the domainendpoints umin, umax, vmin, and vmax are sorted alphabetically. Thus,ezmesh('u^2 - v^3',[0,1],[3,6]) plots u 2 - v 3 over 0 < u < 1, 3 < v < 6.ezmesh(x,y,z) plots the parametric surface x = x(s,t), y = y(s,t), and z = z(s,t)over the square: -2π < s < 2π, -2π < t < 2π.ezmesh(x,y,z,[smin,smax,tmin,tmax]) or ezmesh(x,y,z,[min,max]) plotsthe parametric surface using the specified domain.ezmesh(...,n) plots f over the default domain using an n-by-n grid. The defaultvalue for n is 60.ezmesh(...,'circ') plots f over a disk centered on the domain.rotate3d is always on. To rotate the graph, click and drag with the mouse.2-139