zefiro - larius.org

ZEFIROEnglishPREPARATION OF THE PAINT• Make sure the product is suitable to be used with a spraygun.• Mix and filter the product before using it. For filtration, useCLOSE-MESH (ref. 214) and LARGE-MESH (ref.215) LA-RIUS METEX braids.• Open the safety- relief valve (G2) (turn clockwise so as thepin slides on the cam track).Make sure the product to be used is compatible with thematerials employed for manufacturing the equipment(stainless steel and aluminium). Because of that, pleasecontact the supplier of the product.G2Never use products containing halogen hydrocarbons (as methylenechloride). If these products come into contact with aluminiumparts of the equipment, can provoke dangerous chemical reactionswith risk of explosion.G WORKINGSTART OF THE PAINTING OPERATIONS• Use the tooling after performing all the SETTING UP operationsabove described.• Dip the suction pipe (G1) into the product tank.• Press the switch ON (I) of the equipment and turn a little thepressure control knob (G3) clockwise, so as the machineworks at the idle speed.ONG3G1Delivery pipe connection14