zefiro - larius.org

ZEFIRO• Point the gun (F6) at a container (F7) keeping the triggerpressed (so as to drain the oil inside) till a clean solventcomes out. Now, release the trigger.F6F4OFFEnglishF7• Remove the suction pipe (F8) and take away the solvent tank(F9).F8F9• Point the gun at the solvent tank and press the trigger so asto recover the residual solvent.• As the pump idles, press the OFF (0) switch to stop the tooling(F4).Absolutely avoid to spray solvents indoors. Inaddition, it is recommended to keep away fromthe pump in order to avoid the contact betweenthe solvent fumes and the electric motor.• Now the machine is ready. Should you use water paints,besides the solvent wash, a wash with soapy and then cleanwater is suggested.• Insert the gun trigger lock and assemble the nozzle.13