GENERAL CATALOGUE - Urmet

BIBUS VOPACCESSORIES1074/90 VOP video system wire100 metre reel, consisting of one 1 mm 2 double wire and 0.75 mm 2 double wire.Impedance 100 ohm. Flameproof cable.1795/250 DE signal regeneratorAdapts the VOP video signal with several switching video loudspeaking unitswhen one or more units are installed very much further away from the 1074/20power supply unit.9000/230 12Vac transformer (230Vac 50Hz) Power: 230 Vac - 50 HzPower: 18 VA. Outputs on secondary: 12 Vac @ 1.3A. With PTC self-resettingprotection in event of short-circuit. Dimensions: 54 (W) x 83 (H) x 58.5 (D) mm.Bar fitted, 3 DIN modules.1038/17 16-button expansion module for digital systemsFor use with 1072/19A, 1038/62, 1038/5, 1038/7, 1072/5, 1072/7, 1082/72, 1082/7loudspeaking units to expand the number of buttons in addition to those manageddirectly by the loudspeaking units themselves. For use with 1072/19A, 1072/5-7loudspeaking units.1072/67 Bibus PABX interfaceFor using Scaitel Agorà PABX in Bibus systems and maintaining the originalfunctions (door phone call and conversation, concierge switchboard call andconversation, door opening, special services, floor call). Wall-mounted installation.1072/80 Bibus special decoderAllows to control electrical loads by means of relay (staircase lights, gates, etc.)with toggle or monostable operation. Controlled using button on door phone,concierge switchboard, digitised loudspeaking unit. Wall-mounted installation.Maximum relay switchable current: 5A. Max. voltage applicable on relay contact:30 Vdc 250 Vac. Monostable and toggle operation.40 •