GENERAL CATALOGUE - Urmet

CLIMATE CONTROLTHERMOSTAT TIMERS1430/21430/31430/2 KLIMAT PRO7 weekly thermostat timerWeekly timer thermostat. Two selectable temperatures (comfort or economy).Automatic and three manual operating modes: temporary, comfort permanentand low permanent. The display shows system status, temperature, current time,operating mode, programmed time range for the current day and flat batteryindicator. Advanced comfort functions include: Advanced Time and Stop and Go.- Installation: wall-mounted or 503 box mounted in with specific bracket- Power: 2 LR6 batteries 1.5 Volt- Battery life: approximately 2 years (alkaline)- Max. contact power: 6 A - 250 Vac- Temperature control range: from 10°C to 30°C- Heat differential: 0.2°C asymmetric- Colour: white.- Degree of protection: IP30- Dimensions: 133 (W) x 87 (H) x 32 (D) mm.1430/3** KLIMAT ZOOM weekly thermostat timerWeekly digital wall-mounted thermostat timer for temperature controlin heating and cooling systems. Large LCD showing bar chart of set temperatures24 hours or 12 hours (Zoom function) and all other operating information(time, on/off status, summer/winter, etc). Advanced comfort functions include:Advanced Time and Stop&Go. Other useful functions are: automatic summersaving time switch, cleaning and holiday functions for saving energy and pumpanti-lock to keep the system efficient at all times.- Installation: wall-mounted or 502/503 box mounted in with specific bracket- Power: 2 LR6 batteries 1.5 Volt- Autonomy: approximately 1 years (alkaline)- External control: Free potential exchange- Max. contact power: 5 (1) A @ 250VCA SPDT- Winter temperature setting: +5 … +26 °C- Summer temperature setting: +18 … +30 °C- Differential: 0.2 °C asymmetric.- Colour: anthracite grey with metal coloured hatch- Degree of protection: IP30- Dimensions: 142 (W) x 99 (H) x 33 (D) mm.CLIMATECONTROLACCESSORIES1430/50 Indoor temperature sensor for thermostat timers UTD 1430/2 and 1430/3Sensor for remote temperature detection. Suitable for use with thermostat timerUTD 1430/2 and 1430/3.- Installation: wall-mounted, indoor use.- Sensor: NTC 100K.- Colour: white.- Dimensions: 85 (W) x 85 (H) x 31 (D) mm.1430/60 Outdoor temperature sensor for thermostat timers UTD 1430/2 and 1430/3Sensor for remote temperature detection. Suitable for use with thermostat timerUTD 1430/2 and 1430/3.- Installation: wall-mounted, suitable for outdoor use.- Sensor: NTC 100K.- Colour: white. Degree of protection: IP65.- Dimensions: 52 (W) x 50 (H) x 35.5 (D) mm.** Contact the sales network for availability.• 157