GENERAL CATALOGUE - Urmet

1332/851332/821382/21SURGE PROTECTIONS, FILTERSand system accessoriesSURGE PROTECTIONS AND FILTERS1332/80 Mains surge protection device, 230Vac, 400VAFor maximum efficiency, install the protection on the power line near the deviceto be protected. The device will trip in presence of dangerous current surgeson the power line. Max. current 2A. Max. load: 400VA. Installation: wall mountedon DIN bar, 2 modules. Dimensions: 36 (W) x 104 (H) x 75 (D) mm.1332/85 Mains surge protection device, 230Vac, 4000VAFor maximum efficiency, install the protection on the power line near the deviceto be protected. The device will trip in presence of dangerous current surgeson the power line. Use with Ref. 1332/86 filter recommended becausetheir action is complementary. Max. current 20A Max. load: 4000VAInstallation: DIN bar, 2 modules. Dimensions: 36 (W) x 90 (H) x 58 (D) mm.1332/86 Mains filtering device, 230Vac, 4000VAThe device prevents the propagation of radio-frequency interference on the powernetwork which could cause faults to electronic apparatus sensitive to suchinterference. For better results, use with protection device Ref. 1332/85is recommended to exploit their complementary action.Power: 230Vac - 50Hz Attenuation: 60dB @ 2MHz. Max. current 20AMax. load: 4000VA Installation: DIN bar, 2 modules.Dimensions: 36 (W) x 90 (H) x 58 (D) mm.1332/81 Surge protection device for 1 analogue telephone lineFor maximum efficiency, install the protection on the power line near the PABXto be protected. Specifically, the device must be installed on all dial and extensionlines connecting out of the building or to which electrical devices, such as faxmachines, modems, answering machine, cordless telephones, etc. are connected.The device will trip in presence of dangerous current surges on the line.Installation: wall mounted or DIN bar mounted, 2 modules.Dimensions: 36 (W) x 104 (H) x 75 (D) mm.1332/82 Surge protection device for 2 analogue telephone linesFor maximum efficiency, install the protection on the power line near the PABXto be protected. Specifically, the device must be installed on all dial and extensionlines connecting out of the building or to which electrical devices, such as faxmachines, modems, answering machine, cordless telephones, etc. are connected.The device will trip in presence of dangerous current surges on the line.Installation: wall mounted or DIN bar mounted, 2 modules.Dimensions: 36 (W) x 104 (H) x 75 (D) mm.1382/21 Surge protection device with “ADSL 2+” filterThe device integrates the functions of a telephone line surge protectionand of a professional ADSL 2 filter (splitter). For maximum efficiency,install the protection on the telephone line near the PABX to be protected.The device will trip in presence of dangerous current surges on the line.Installation: wall mounted on DIN bar, 2 modules.Dimensions: 36 (W) x 104 (H) x 75 (D) mm.152 •