Bosch Rexroth IndraDyn S - MKE Project Planning Manual

More documents

Recommendations

Info

96/131 Bosch Rexroth AG | Electric Drivesand ControlsRexroth MKE Synchronous Motors | Project Planning ManualState of Delivery, Identification, Handling, Transport and StorageEU designUL designFig.10-1:Name plate (example MKE)The name plate is provided for●●●identification of the motorprocurement of spare parts in case of a failureservice information.10.3 Handling, Transport and StorageThe type designation of the motor is also filed in the encoder datamemory.CAUTIONDamage or injuries and invalidation of the warranty due to improperhandling!⇒ Avoid mechanical stressing, throwing, tipping or dropping of the products.⇒ Use only suitable lifting equipment.⇒ Never lift up the motor on the optional fan housing.⇒ Use suitable protective equipment and protective clothing during transport.⇒ Protect the products from dampness and corrosion.HandlingAlso observe the notes regarding storage and transport on the packagesOn delivery, the MKE motors have protective caps and covers on the outputshaft and on the flange sockets. During transport and storage, the protectivesleeves must remain on the motor.●●●Remove the protective sleeves just before assembly.Also use the protective sleeves if you return the goods.Avoid damage to the motor flange and drive shaft.
Project Planning Manual | Rexroth MKE Synchronous Motors Electric Drivesand Controls| Bosch Rexroth AG 97/131State of Delivery, Identification, Handling, Transport and Storage●Do not exert impact or pressure to the stub shaft.Fig.10-2: Adhesive labelTransport Requirements for transport according to DIN EN 60271-3-2:Environmental factor Unit Class 2K3Low air temperature °C -25High air temperature °C +70Max. rel. air humidity % 95Max. absolute air humidity g/m³ 60Shock stresssee "Technical Data"Fig.10-3:Conditions for transportPlease observe the following points during transport:●●●●Use suitable means of transport and consider the weight of the components(you can find the weight information on the data sheets or on thetype label of the motor).Provide shock absorbers if strong vibrations may occur during transport.Transport the motors only in the horizontal position.Use cranes with lifting sling belts to lift the motors.Fig.10-4: Lifting and transporting motors by means of lifting sling beltsBearing Requirements for storage according to DIN EN 60271-3-1.Environmental factor Unit Class 1K3Low air temperature °C -5High air temperature °C +45
Page 1:
Electric DrivesLinear Motion andand
Page 4 and 5:
II/VIBosch Rexroth AG | Electric Dr
Page 6 and 7:
IV/VIBosch Rexroth AG | Electric Dr
Page 8 and 9:
VI/VIBosch Rexroth AG | Electric Dr
Page 10 and 11:
8/131 Bosch Rexroth AG | Electric D
Page 12 and 13:
10/131 Bosch Rexroth AG | Electric
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26:
Page 29 and 30:
Project Planning Manual | Rexroth M
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48: Project Planning Manual | Rexroth M
Page 97: Project Planning Manual | Rexroth M
show all

Bosch Rexroth IndraDyn S - MKE Project Planning Manual

Create successful ePaper yourself

Delete template?

Save as template?