Bosch Rexroth IndraDyn S - MKE Project Planning Manual

52/131 Bosch Rexroth AG | Electric Drivesand ControlsRexroth MKE Synchronous Motors | Project Planning ManualType CodesHolding brakeAs an option, IndraDyn S motors are available with electrically releasing holdingbrakes with various holding torques.Option Holding brakes0 Without holdingbrake1, 2, 3 With holding brake The holding torques are indicated in the motor typecode.Fig.6-3:IndraDyn S holding brakesOutput direction of power connectorThe holding brake is not suitable for the protection of personnel oras a service brake! Please also observe the installation and safetyinstructions on the motor holding brakes in the chapter entitled "Applicationnotes".The cable outlet direction of the UL/CSA motors will be delivered according tothe order. For the EU version, only output direction B is available. However, theoutput direction can be changed when the motor is mounted.Housing typePicture1 Valid for MKE037, -047, -098Picture2 Valid for MKE118Fig.6-4: Position of the power connector for MKE motorsOption Housing type CommentEAccording to European standard(EN)Output directionpower connector only B sideOther types / line entry (diameter)Reference to standardsCommentUUEFig.6-5:According to American Standard(UL)Housing type for North American countries (USA, Canada)Housing type for European and Asian countriesMKE housing typeFor options and availability, see type code.Note regarding the standards cited in the type code (e.g. DIN, EN, ISO) orfactory standards RNC... ). The version listed is always that valid at the timethe type code is issued.Please refer to this item for additionally required information concerning thehandling of the type code. This includes, for example, descriptions on footnotesor notes on availability.